Enable the dpsub device and wire it up to the PS-GTR PHY lanes routed to the DisplayPort connector.
Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com --- .../arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 93ce7eb81498..4656f25b6b04 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -13,6 +13,7 @@ #include "zynqmp-clk.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h>
/ { model = "ZynqMP ZCU106 RevA"; @@ -69,6 +70,17 @@ status = "okay"; };
+&dpdma { + status = "okay"; +}; + +&dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&lane1 PHY_TYPE_DP 0 3 27000000>, + <&lane0 PHY_TYPE_DP 1 3 27000000>; +}; + /* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; @@ -503,6 +515,10 @@ no-1-8-v; };
+&serdes { + status = "okay"; +}; + &uart0 { status = "okay"; };