The patch adds bridge and panel nodes. It adds also DSI properties specific for arndale board.
Signed-off-by: Andrzej Hajda a.hajda@samsung.com Signed-off-by: Maciej Purski m.purski@samsung.com --- arch/arm/boot/dts/exynos5250-arndale.dts | 39 ++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 80221fa..6f0b1c4 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -71,6 +71,17 @@ }; };
+ panel: panel { + compatible = "boe,hv070wsa-100"; + power-supply = <&vcc_3v3_reg>; + enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; + port { + panel_ep: endpoint { + remote-endpoint = <&bridge_out_ep>; + }; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -476,6 +487,34 @@ }; };
+&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,pll-clock-frequency = <24000000>; + samsung,burst-clock-frequency = <320000000>; + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358764"; + vddc-supply = <&vcc_1v2_reg>; + vddio-supply = <&vcc_1v8_reg>; + vddmipi-supply = <&vcc_1v2_reg>; + vddlvds133-supply = <&vcc_3v3_reg>; + vddlvds112-supply = <&vcc_1v2_reg>; + reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + bridge_out_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; + }; + }; +}; + &i2c_2 { status = "okay"; /* used by HDMI DDC */