Add display-timings.yaml - that references panel-timings.yaml. display-timings.yaml will be used for display bindings when they are converted to meta-schema format.
For now the old display-timing.txt points to the new display-timings.yaml - and all users are left as-is.
v2: - Updated native-mode description
Signed-off-by: Sam Ravnborg sam@ravnborg.org Cc: Rob Herring robh@kernel.org Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Thierry Reding thierry.reding@gmail.com Cc: Oleksandr Suvorov oleksandr.suvorov@toradex.com Cc: devicetree@vger.kernel.org --- .../bindings/display/panel/display-timing.txt | 124 +----------------- .../display/panel/display-timings.yaml | 68 ++++++++++ 2 files changed, 69 insertions(+), 123 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/display-timings.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt index 78222ced1874..7f55ad4a40c4 100644 --- a/Documentation/devicetree/bindings/display/panel/display-timing.txt +++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt @@ -1,123 +1 @@ -display-timing bindings -======================= - -display-timings node --------------------- - -required properties: - - none - -optional properties: - - native-mode: The native mode for the display, in case multiple modes are - provided. When omitted, assume the first node is the native. - -timing subnode --------------- - -required properties: - - hactive, vactive: display resolution - - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters - in pixels - vfront-porch, vback-porch, vsync-len: vertical display timing parameters in - lines - - clock-frequency: display clock in Hz - -optional properties: - - hsync-active: hsync pulse is active low/high/ignored - - vsync-active: vsync pulse is active low/high/ignored - - de-active: data-enable pulse is active low/high/ignored - - pixelclk-active: with - - active high = drive pixel data on rising edge/ - sample data on falling edge - - active low = drive pixel data on falling edge/ - sample data on rising edge - - ignored = ignored - - syncclk-active: with - - active high = drive sync on rising edge/ - sample sync on falling edge of pixel - clock - - active low = drive sync on falling edge/ - sample sync on rising edge of pixel - clock - - omitted = same configuration as pixelclk-active - - interlaced (bool): boolean to enable interlaced mode - - doublescan (bool): boolean to enable doublescan mode - - doubleclk (bool): boolean to enable doubleclock mode - -All the optional properties that are not bool follow the following logic: - <1>: high active - <0>: low active - omitted: not used on hardware - -There are different ways of describing the capabilities of a display. The -devicetree representation corresponds to the one commonly found in datasheets -for displays. If a display supports multiple signal timings, the native-mode -can be specified. - -The parameters are defined as: - - +----------+-------------------------------------+----------+-------+ - | | ^ | | | - | | |vback_porch | | | - | | v | | | - +----------#######################################----------+-------+ - | # ^ # | | - | # | # | | - | hback # | # hfront | hsync | - | porch # | hactive # porch | len | - |<-------->#<-------+--------------------------->#<-------->|<----->| - | # | # | | - | # |vactive # | | - | # | # | | - | # v # | | - +----------#######################################----------+-------+ - | | ^ | | | - | | |vfront_porch | | | - | | v | | | - +----------+-------------------------------------+----------+-------+ - | | ^ | | | - | | |vsync_len | | | - | | v | | | - +----------+-------------------------------------+----------+-------+ - -Note: In addition to being used as subnode(s) of display-timings, the timing - subnode may also be used on its own. This is appropriate if only one mode - need be conveyed. In this case, the node should be named 'panel-timing'. - - -Example: - - display-timings { - native-mode = <&timing0>; - timing0: 1080p24 { - /* 1920x1080p24 */ - clock-frequency = <52000000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <25>; - hback-porch = <25>; - hsync-len = <25>; - vback-porch = <2>; - vfront-porch = <2>; - vsync-len = <2>; - hsync-active = <1>; - }; - }; - -Every required property also supports the use of ranges, so the commonly used -datasheet description with minimum, typical and maximum values can be used. - -Example: - - timing1: timing { - /* 1920x1080p24 */ - clock-frequency = <148500000>; - hactive = <1920>; - vactive = <1080>; - hsync-len = <0 44 60>; - hfront-porch = <80 88 95>; - hback-porch = <100 148 160>; - vfront-porch = <0 4 6>; - vback-porch = <0 36 50>; - vsync-len = <0 5 6>; - }; +See display-timings.yaml in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml new file mode 100644 index 000000000000..508302cd307a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/display-timings.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: display timing bindings + +maintainers: + - Thierry Reding thierry.reding@gmail.com + - Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com + - Sam Ravnborg sam@ravnborg.org + +properties: + $nodename: + const: display-timings + + native-mode: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + The default dispaly timing is the one specified as native-mode. + If no native-mode is specified then the first node is assume the + native mode. + +patternProperties: + "^timing.*$": + allOf: + - $ref: panel-timing.yaml# + +additionalProperties: false + +examples: + - |+ + + /* + * Example that specifies panel timing using minimum, typical, + * maximum values as commonly used in datasheet description. + * timing1 is the native-mode. + */ + display-timings { + native-mode = <&timing1>; + timing0 { + /* 1920x1080p24 */ + clock-frequency = <148500000>; + hactive = <1920>; + vactive = <1080>; + hsync-len = <0 44 60>; + hfront-porch = <80 88 95>; + hback-porch = <100 148 160>; + vfront-porch = <0 4 6>; + vback-porch = <0 36 50>; + vsync-len = <0 5 6>; + }; + timing1 { + /* 1920x1080p24 */ + clock-frequency = <52000000>; + hactive = <1920>; + vactive = <1080>; + hfront-porch = <25>; + hback-porch = <25>; + hsync-len = <0 25 25>; + vback-porch = <2>; + vfront-porch = <2>; + vsync-len = <2>; + hsync-active = <1>; + pixelclk-active = <1>; + }; + };