Le 30/04/2015 16:39, Boris Brezillon a écrit :
All modes exposed by simple panels should be tagged as driver defined modes. Moreover, if a panel supports only one mode, this mode is obviously the preferred one.
Doing this also fix a problem occurring when a 'video=' parameter is passed on the kernel cmdline. In some cases the user provided mode is preferred over the simple panel ones, which might result in unpredictable behavior.
Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com
Tested-by: Nicolas Ferre nicolas.ferre@atmel.com On Atmel sama5d3xek board.
drivers/gpu/drm/panel/panel-simple.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index d14b904..95ae390 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -111,6 +111,10 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel) continue; }
mode->type |= DRM_MODE_TYPE_DRIVER;if (panel->desc->num_modes == 1)mode->type |= DRM_MODE_TYPE_PREFERRED;drm_display_mode_from_videomode(&vm, mode);
drm_mode_probed_add(connector, mode);
@@ -127,6 +131,10 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel) continue; }
mode->type |= DRM_MODE_TYPE_DRIVER;if (panel->desc->num_modes == 1)mode->type |= DRM_MODE_TYPE_PREFERRED;drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);