Some clock providers (clk-vexpress-osc) trigger a WARN() when the requested rate falls outside its capabilities, as is the case when a CRTC gets disabled. Check if the CRTC's new state is enabled and skip the clk_round_rate() call if it is not.
Reported-by: Vladimir Murzin vladimir.murzin@arm.com Signed-off-by: Liviu Dudau Liviu.Dudau@arm.com Tested-by: Vladimir Murzin vladimir.murzin@arm.com --- drivers/gpu/drm/arm/hdlcd_crtc.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/arm/hdlcd_crtc.c b/drivers/gpu/drm/arm/hdlcd_crtc.c index 72b22b805412b..a1387a8bf78c4 100644 --- a/drivers/gpu/drm/arm/hdlcd_crtc.c +++ b/drivers/gpu/drm/arm/hdlcd_crtc.c @@ -193,6 +193,10 @@ static int hdlcd_crtc_atomic_check(struct drm_crtc *crtc, struct drm_display_mode *mode = &state->adjusted_mode; long rate, clk_rate = mode->clock * 1000;
+ /* if the crtc is disabled, skip the clock check */ + if (!state->enable) + return 0; + rate = clk_round_rate(hdlcd->clk, clk_rate); if (rate != clk_rate) { /* clock required by mode not supported by hardware */