Don't specify the reset GPIO for the OnePlus 6T, the panel in the 6T will refuse to initialise if it has been reset so use this as a workaround.
Signed-off-by: Caleb Connolly caleb@connolly.tech --- arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 +--- arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts | 2 ++ 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index e81f5cc9f26d..1339bac8afc2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -331,8 +331,6 @@ display_panel: panel@0 {
vddio-supply = <&vreg_l14a_1p88>;
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
@@ -615,7 +613,7 @@ mux { pins = "gpio6", "gpio25", "gpio26"; function = "gpio"; drive-strength = <8>; - bias-disable = <0>; + bias-disable; }; };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 72842c887617..5c728c1555f3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -16,4 +16,6 @@ &display_panel { status = "okay";
compatible = "samsung,sofef00"; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; }; -- 2.32.0