From: Sinclair Yeh syeh@vmware.com
Add support for the screen target device interface. Add a getparam parameter and bump minor to signal availability.
Signed-off-by: Sinclair Yeh syeh@vmware.com Signed-off-by: Thomas Hellstrom thellstrom@vmware.com --- drivers/gpu/drm/vmwgfx/Makefile | 2 +- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 24 +- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 15 +- drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 4 + drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 62 +- drivers/gpu/drm/vmwgfx/vmwgfx_kms.h | 20 + drivers/gpu/drm/vmwgfx/vmwgfx_mob.c | 3 +- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 1364 +++++++++++++++++++++++++++++++ drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 4 + include/uapi/drm/vmwgfx_drm.h | 1 + 10 files changed, 1475 insertions(+), 24 deletions(-) create mode 100644 drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
diff --git a/drivers/gpu/drm/vmwgfx/Makefile b/drivers/gpu/drm/vmwgfx/Makefile index 529bc72..4840939 100644 --- a/drivers/gpu/drm/vmwgfx/Makefile +++ b/drivers/gpu/drm/vmwgfx/Makefile @@ -7,6 +7,6 @@ vmwgfx-y := vmwgfx_execbuf.o vmwgfx_gmr.o vmwgfx_kms.o vmwgfx_drv.o \ vmwgfx_overlay.o vmwgfx_marker.o vmwgfx_gmrid_manager.o \ vmwgfx_fence.o vmwgfx_dmabuf.o vmwgfx_scrn.o vmwgfx_context.o \ vmwgfx_surface.o vmwgfx_prime.o vmwgfx_mob.o vmwgfx_shader.o \ - vmwgfx_cmdbuf_res.o vmwgfx_cmdbuf.o \ + vmwgfx_cmdbuf_res.o vmwgfx_cmdbuf.o vmwgfx_stdu.o \
obj-$(CONFIG_DRM_VMWGFX) := vmwgfx.o diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 7e2b3c8..ab1b70c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -693,22 +693,28 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) SVGA_REG_MAX_PRIMARY_BOUNDING_BOX_MEM); dev_priv->max_mob_size = vmw_read(dev_priv, SVGA_REG_MOB_MAX_SIZE); + dev_priv->stdu_max_width = + vmw_read(dev_priv, SVGA_REG_SCREENTARGET_MAX_WIDTH); + dev_priv->stdu_max_height = + vmw_read(dev_priv, SVGA_REG_SCREENTARGET_MAX_HEIGHT); + + vmw_write(dev_priv, SVGA_REG_DEV_CAP, + SVGA3D_DEVCAP_MAX_TEXTURE_WIDTH); + dev_priv->texture_max_width = vmw_read(dev_priv, + SVGA_REG_DEV_CAP); + vmw_write(dev_priv, SVGA_REG_DEV_CAP, + SVGA3D_DEVCAP_MAX_TEXTURE_HEIGHT); + dev_priv->texture_max_height = vmw_read(dev_priv, + SVGA_REG_DEV_CAP); } else dev_priv->prim_bb_mem = dev_priv->vram_size; + + vmw_print_capabilities(dev_priv->capabilities);
ret = vmw_dma_masks(dev_priv); if (unlikely(ret != 0)) goto out_err0;
- /* - * Limit back buffer size to VRAM size. Remove this once - * screen targets are implemented. - */ - if (dev_priv->prim_bb_mem > dev_priv->vram_size) - dev_priv->prim_bb_mem = dev_priv->vram_size; - - vmw_print_capabilities(dev_priv->capabilities); - if (dev_priv->capabilities & SVGA_CAP_GMR2) { DRM_INFO("Max GMR ids is %u\n", (unsigned)dev_priv->max_gmr_ids); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index c3f8fc9..04f8bf2 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -40,17 +40,17 @@ #include <drm/ttm/ttm_module.h> #include "vmwgfx_fence.h"
-#define VMWGFX_DRIVER_DATE "20140704" +#define VMWGFX_DRIVER_DATE "20150626" #define VMWGFX_DRIVER_MAJOR 2 -#define VMWGFX_DRIVER_MINOR 6 -#define VMWGFX_DRIVER_PATCHLEVEL 1 +#define VMWGFX_DRIVER_MINOR 7 +#define VMWGFX_DRIVER_PATCHLEVEL 0 #define VMWGFX_FILE_PAGE_OFFSET 0x00100000 #define VMWGFX_FIFO_STATIC_SIZE (1024*1024) #define VMWGFX_MAX_RELOCATIONS 2048 #define VMWGFX_MAX_VALIDATIONS 2048 #define VMWGFX_MAX_DISPLAYS 16 #define VMWGFX_CMD_BOUNCE_INIT_SIZE 32768 -#define VMWGFX_ENABLE_SCREEN_TARGET_OTABLE 0 +#define VMWGFX_ENABLE_SCREEN_TARGET_OTABLE 1
/* * Perhaps we should have sysfs entries for these. @@ -337,7 +337,8 @@ struct vmw_ctx_binding_state { enum vmw_display_unit_type { vmw_du_invalid = 0, vmw_du_legacy, - vmw_du_screen_object + vmw_du_screen_object, + vmw_du_screen_target };
@@ -402,6 +403,10 @@ struct vmw_private { uint32_t mmio_size; uint32_t fb_max_width; uint32_t fb_max_height; + uint32_t texture_max_width; + uint32_t texture_max_height; + uint32_t stdu_max_width; + uint32_t stdu_max_height; uint32_t initial_width; uint32_t initial_height; __le32 __iomem *mmio_virt; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 69c8ce2..55940bc 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -105,6 +105,10 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data, case DRM_VMW_PARAM_MAX_MOB_SIZE: param->value = dev_priv->max_mob_size; break; + case DRM_VMW_PARAM_SCREEN_TARGET: + param->value = + (dev_priv->active_display_unit == vmw_du_screen_target); + break; default: DRM_ERROR("Illegal vmwgfx get param request: %d\n", param->param); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 7566a5a..6680aa6 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -463,6 +463,11 @@ static int vmw_framebuffer_surface_dirty(struct drm_framebuffer *framebuffer, flags, color, clips, num_clips, inc, NULL); + else + ret = vmw_kms_stdu_do_surface_dirty(dev_priv, file_priv, + &vfbs->base, + clips, num_clips, + inc);
vmw_fifo_flush(dev_priv, false); ttm_read_unlock(&dev_priv->reservation_sem); @@ -636,6 +641,11 @@ static int vmw_framebuffer_dmabuf_dirty(struct drm_framebuffer *framebuffer, flags, color, clips, num_clips, increment, NULL); + } else { + ret = vmw_kms_stdu_do_surface_dirty(dev_priv, file_priv, + &vfbd->base, + clips, num_clips, + increment); }
vmw_fifo_flush(dev_priv, false); @@ -999,8 +1009,6 @@ int vmw_kms_generic_present(struct vmw_private *dev_priv, break; }
- vmw_fifo_flush(dev_priv, false); - kfree(cmd); out_free_tmp: kfree(tmp); @@ -1017,8 +1025,21 @@ int vmw_kms_present(struct vmw_private *dev_priv, struct drm_vmw_rect *clips, uint32_t num_clips) { - return vmw_kms_generic_present(dev_priv, file_priv, vfb, surface, sid, - destX, destY, clips, num_clips); + int ret; + + if (dev_priv->active_display_unit == vmw_du_screen_target) + ret = vmw_kms_stdu_present(dev_priv, file_priv, vfb, sid, + destX, destY, clips, num_clips); + else + ret = vmw_kms_generic_present(dev_priv, file_priv, vfb, + surface, sid, destX, destY, + clips, num_clips); + if (ret) + return ret; + + vmw_fifo_flush(dev_priv, false); + + return 0; }
int vmw_kms_readback(struct vmw_private *dev_priv, @@ -1141,9 +1162,12 @@ int vmw_kms_init(struct vmw_private *dev_priv) dev->mode_config.max_width = 8192; dev->mode_config.max_height = 8192;
- ret = vmw_kms_sou_init_display(dev_priv); - if (ret) /* Fallback */ - ret = vmw_kms_ldu_init_display(dev_priv); + ret = vmw_kms_stdu_init_display(dev_priv); + if (ret) { + ret = vmw_kms_sou_init_display(dev_priv); + if (ret) /* Fallback */ + ret = vmw_kms_ldu_init_display(dev_priv); + }
return ret; } @@ -1160,6 +1184,8 @@ int vmw_kms_close(struct vmw_private *dev_priv) drm_mode_config_cleanup(dev_priv->dev); if (dev_priv->active_display_unit == vmw_du_screen_object) ret = vmw_kms_sou_close_display(dev_priv); + else if (dev_priv->active_display_unit == vmw_du_screen_target) + ret = vmw_kms_stdu_close_display(dev_priv); else ret = vmw_kms_ldu_close_display(dev_priv);
@@ -1311,7 +1337,9 @@ bool vmw_kms_validate_mode_vram(struct vmw_private *dev_priv, uint32_t pitch, uint32_t height) { - return ((u64) pitch * (u64) height) < (u64) dev_priv->prim_bb_mem; + return ((u64) pitch * (u64) height) < (u64) + ((dev_priv->active_display_unit == vmw_du_screen_target) ? + dev_priv->prim_bb_mem : dev_priv->vram_size); }
@@ -1558,6 +1586,11 @@ int vmw_du_connector_fill_modes(struct drm_connector *connector, if (dev_priv->active_display_unit == vmw_du_screen_object) assumed_bpp = 4;
+ if (dev_priv->active_display_unit == vmw_du_screen_target) { + max_width = min(max_width, dev_priv->stdu_max_width); + max_height = min(max_height, dev_priv->stdu_max_height); + } + /* Add preferred mode */ mode = drm_mode_duplicate(dev, &prefmode); if (!mode) @@ -1674,6 +1707,19 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, bounding_box.h = rects[i].y + rects[i].h; }
+ /* + * For Screen Target Display Unit, all the displays must fit + * inside of maximum texture size. + */ + if (dev_priv->active_display_unit == vmw_du_screen_target) + if (bounding_box.w > dev_priv->texture_max_width || + bounding_box.h > dev_priv->texture_max_height) { + DRM_ERROR("Layout exceeds maximum texture size\n"); + ret = -EINVAL; + goto out_free; + } + + vmw_du_update_layout(dev_priv, arg->num_outputs, rects);
out_free: diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h index 0f2c291..548fa87 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h @@ -204,4 +204,24 @@ int vmw_kms_sou_do_dmabuf_dirty(struct drm_file *file_priv, struct drm_clip_rect *clips, unsigned num_clips, int increment, struct vmw_fence_obj **out_fence); + + +/* + * Screen Target Display Unit functions - vmwgfx_stdu.c + */ +int vmw_kms_stdu_init_display(struct vmw_private *dev_priv); +int vmw_kms_stdu_close_display(struct vmw_private *dev_priv); +int vmw_kms_stdu_do_surface_dirty(struct vmw_private *dev_priv, + struct drm_file *file_priv, + struct vmw_framebuffer *framebuffer, + struct drm_clip_rect *clips, + unsigned num_clips, int increment); +int vmw_kms_stdu_present(struct vmw_private *dev_priv, + struct drm_file *file_priv, + struct vmw_framebuffer *vfb, + uint32_t user_handle, + int32_t dest_x, int32_t dest_y, + struct drm_vmw_rect *clips, + uint32_t num_clips); + #endif diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c index 46f975e..0feac56 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c @@ -31,7 +31,8 @@ * If we set up the screen target otable, screen objects stop working. */
-#define VMW_OTABLE_SETUP_SUB ((VMWGFX_ENABLE_SCREEN_TARGET_OTABLE) ? 0 : 1) +#define VMW_OTABLE_SETUP_SUB ((VMWGFX_ENABLE_SCREEN_TARGET_OTABLE && \ + (dev_priv->capabilities & SVGA_CAP_3D)) ? 0 : 1)
#ifdef CONFIG_64BIT #define VMW_PPN_SIZE 8 diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c new file mode 100644 index 0000000..3b8235c --- /dev/null +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -0,0 +1,1364 @@ +/****************************************************************************** + * + * Copyright © 2014 VMware, Inc., Palo Alto, CA., USA + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + ******************************************************************************/ + +#include "vmwgfx_kms.h" +#include "svga3d_surfacedefs.h" +#include <drm/drm_plane_helper.h> + +#define vmw_crtc_to_stdu(x) \ + container_of(x, struct vmw_screen_target_display_unit, base.crtc) +#define vmw_encoder_to_stdu(x) \ + container_of(x, struct vmw_screen_target_display_unit, base.encoder) +#define vmw_connector_to_stdu(x) \ + container_of(x, struct vmw_screen_target_display_unit, base.connector) + + + +enum stdu_content_type { + SAME_AS_DISPLAY = 0, + SEPARATE_SURFACE, + SEPARATE_DMA +}; + + + +/** + * struct vmw_screen_target_display_unit + * + * @base: VMW specific DU structure + * @display_srf: surface to be displayed. The dimension of this will always + * match the display mode. If the display mode matches + * content_vfbs dimensions, then this is a pointer into the + * corresponding field in content_vfbs. If not, then this + * is a separate buffer to which content_vfbs will blit to. + * @content_fb: holds the rendered content, can be a surface or DMA buffer + * @content_type: content_fb type + * @defined: true if the current display unit has been initialized + */ +struct vmw_screen_target_display_unit { + struct vmw_display_unit base; + + struct vmw_surface *display_srf; + struct drm_framebuffer *content_fb; + + enum stdu_content_type content_fb_type; + + bool defined; +}; + + + +static void vmw_stdu_destroy(struct vmw_screen_target_display_unit *stdu); + + + +/****************************************************************************** + * Screen Target Display Unit helper Functions + *****************************************************************************/ + +/** + * vmw_stdu_pin_display - pins the resource associated with the display surface + * + * @stdu: contains the display surface + * + * Since the display surface can either be a private surface allocated by us, + * or it can point to the content surface, we use this function to not pin the + * same resource twice. + */ +static int vmw_stdu_pin_display(struct vmw_screen_target_display_unit *stdu) +{ + return vmw_resource_pin(&stdu->display_srf->res); +} + + + +/** + * vmw_stdu_unpin_display - unpins the resource associated with display surface + * + * @stdu: contains the display surface + * + * If the display surface was privatedly allocated by + * vmw_surface_gb_priv_define() and not registered as a framebuffer, then it + * won't be automatically cleaned up when all the framebuffers are freed. As + * such, we have to explicitly call vmw_resource_unreference() to get it freed. + */ +static void vmw_stdu_unpin_display(struct vmw_screen_target_display_unit *stdu) +{ + if (stdu->display_srf) { + struct vmw_resource *res = &stdu->display_srf->res; + + vmw_resource_unpin(res); + + if (stdu->content_fb_type != SAME_AS_DISPLAY) { + vmw_resource_unreference(&res); + stdu->content_fb_type = SAME_AS_DISPLAY; + } + + stdu->display_srf = NULL; + } +} + + + +/****************************************************************************** + * Screen Target Display Unit CRTC Functions + *****************************************************************************/ + + +/** + * vmw_stdu_crtc_destroy - cleans up the STDU + * + * @crtc: used to get a reference to the containing STDU + */ +static void vmw_stdu_crtc_destroy(struct drm_crtc *crtc) +{ + vmw_stdu_destroy(vmw_crtc_to_stdu(crtc)); +} + + + +/** + * vmw_stdu_content_copy - copies an area from the content to display surface + * + * @dev_priv: VMW DRM device + * @file_priv: Pointer to a drm file private structure + * @stdu: STDU whose display surface will be blitted to + * @content_x: top/left corner of the content area to blit from + * @content_y: top/left corner of the content area to blit from + * @width: width of the blit area + * @height: height of the blit area + * @display_x: top/left corner of the display area to blit to + * @display_y: top/left corner of the display area to blit to + * + * Copies an area from the content surface to the display surface. + * + * RETURNs: + * 0 on success, error code on failure + */ +static int vmw_stdu_content_copy(struct vmw_private *dev_priv, + struct drm_file *file_priv, + struct vmw_screen_target_display_unit *stdu, + uint32_t content_x, uint32_t content_y, + uint32_t width, uint32_t height, + uint32_t display_x, uint32_t display_y) +{ + size_t fifo_size; + int ret; + void *cmd; + + struct vmw_surface_dma { + SVGA3dCmdHeader header; + SVGA3dCmdSurfaceDMA body; + SVGA3dCopyBox area; + SVGA3dCmdSurfaceDMASuffix suffix; + } surface_dma_cmd; + + struct { + SVGA3dCmdHeader header; + SVGA3dCmdSurfaceCopy body; + SVGA3dCopyBox area; + } surface_cpy_cmd; + + + /* + * Can only copy if content and display surfaces exist and are not + * the same surface + */ + if (stdu->display_srf == NULL || stdu->content_fb == NULL || + stdu->content_fb_type == SAME_AS_DISPLAY) { + return -EINVAL; + } + + if (stdu->content_fb_type == SEPARATE_DMA) { + struct vmw_framebuffer *content_vfb; + struct vmw_framebuffer_dmabuf *content_vfbd; + struct vmw_framebuffer_surface *content_vfbs; + struct drm_vmw_size cur_size = {0}; + const struct svga3d_surface_desc *desc; + SVGA3dCmdSurfaceDMASuffix *suffix; + SVGAGuestPtr ptr; + + content_vfb = vmw_framebuffer_to_vfb(stdu->content_fb); + content_vfbd = vmw_framebuffer_to_vfbd(stdu->content_fb); + content_vfbs = vmw_framebuffer_to_vfbs(stdu->content_fb); + + cur_size.width = width; + cur_size.height = height; + cur_size.depth = 1; + + desc = svga3dsurface_get_desc(content_vfbs->surface->format); + + + fifo_size = sizeof(surface_dma_cmd); + + memset(&surface_dma_cmd, 0, fifo_size); + + ptr.gmrId = content_vfb->user_handle; + ptr.offset = 0; + + surface_dma_cmd.header.id = SVGA_3D_CMD_SURFACE_DMA; + surface_dma_cmd.header.size = sizeof(surface_dma_cmd.body) + + sizeof(surface_dma_cmd.area) + + sizeof(surface_dma_cmd.suffix); + + surface_dma_cmd.body.guest.ptr = ptr; + surface_dma_cmd.body.guest.pitch = stdu->content_fb->pitches[0]; + surface_dma_cmd.body.host.sid = stdu->display_srf->res.id; + surface_dma_cmd.body.host.face = 0; + surface_dma_cmd.body.host.mipmap = 0; + surface_dma_cmd.body.transfer = SVGA3D_WRITE_HOST_VRAM; + + surface_dma_cmd.area.srcx = content_x; + surface_dma_cmd.area.srcy = content_y; + surface_dma_cmd.area.x = display_x; + surface_dma_cmd.area.y = display_y; + surface_dma_cmd.area.d = 1; + surface_dma_cmd.area.w = width; + surface_dma_cmd.area.h = height; + + suffix = &surface_dma_cmd.suffix; + + suffix->suffixSize = sizeof(*suffix); + suffix->maximumOffset = svga3dsurface_get_image_buffer_size( + desc, + &cur_size, + stdu->content_fb->pitches[0]); + + cmd = (void *) &surface_dma_cmd; + } else { + struct vmw_framebuffer *content_vfb; + + content_vfb = vmw_framebuffer_to_vfb(stdu->content_fb); + + fifo_size = sizeof(surface_cpy_cmd); + + memset(&surface_cpy_cmd, 0, sizeof(surface_cpy_cmd)); + + surface_cpy_cmd.header.id = SVGA_3D_CMD_SURFACE_COPY; + surface_cpy_cmd.header.size = sizeof(surface_cpy_cmd.body) + + sizeof(surface_cpy_cmd.area); + + surface_cpy_cmd.body.src.sid = content_vfb->user_handle; + surface_cpy_cmd.body.dest.sid = stdu->display_srf->res.id; + + surface_cpy_cmd.area.srcx = content_x; + surface_cpy_cmd.area.srcy = content_y; + surface_cpy_cmd.area.x = display_x; + surface_cpy_cmd.area.y = display_y; + surface_cpy_cmd.area.d = 1; + surface_cpy_cmd.area.w = width; + surface_cpy_cmd.area.h = height; + + cmd = (void *) &surface_cpy_cmd; + } + + ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd, + fifo_size, 0, VMW_QUIRK_SCREENTARGET, + NULL, NULL); + + return ret; +} + + + +/** + * vmw_stdu_define_st - Defines a Screen Target + * + * @dev_priv: VMW DRM device + * @stdu: display unit to create a Screen Target for + * + * Creates a STDU that we can used later. This function is called whenever the + * framebuffer size changes. + * + * RETURNs: + * 0 on success, error code on failure + */ +static int vmw_stdu_define_st(struct vmw_private *dev_priv, + struct vmw_screen_target_display_unit *stdu) +{ + struct { + SVGA3dCmdHeader header; + SVGA3dCmdDefineGBScreenTarget body; + } *cmd; + + cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd)); + + if (unlikely(cmd == NULL)) { + DRM_ERROR("Out of FIFO space defining Screen Target\n"); + return -ENOMEM; + } + + cmd->header.id = SVGA_3D_CMD_DEFINE_GB_SCREENTARGET; + cmd->header.size = sizeof(cmd->body); + + cmd->body.stid = stdu->base.unit; + cmd->body.width = stdu->display_srf->base_size.width; + cmd->body.height = stdu->display_srf->base_size.height; + cmd->body.flags = (0 == cmd->body.stid) ? SVGA_STFLAG_PRIMARY : 0; + cmd->body.dpi = 0; + cmd->body.xRoot = stdu->base.crtc.x; + cmd->body.yRoot = stdu->base.crtc.y; + + if (!stdu->base.is_implicit) { + cmd->body.xRoot = stdu->base.gui_x; + cmd->body.yRoot = stdu->base.gui_y; + } + + vmw_fifo_commit(dev_priv, sizeof(*cmd)); + + stdu->defined = true; + + return 0; +} + + + +/** + * vmw_stdu_bind_st - Binds a surface to a Screen Target + * + * @dev_priv: VMW DRM device + * @stdu: display unit affected + * @res: Buffer to bind to the screen target. Set to NULL to blank screen. + * + * Binding a surface to a Screen Target the same as flipping + */ +static int vmw_stdu_bind_st(struct vmw_private *dev_priv, + struct vmw_screen_target_display_unit *stdu, + struct vmw_resource *res) +{ + SVGA3dSurfaceImageId image; + + struct { + SVGA3dCmdHeader header; + SVGA3dCmdBindGBScreenTarget body; + } *cmd; + + + if (!stdu->defined) { + DRM_ERROR("No screen target defined\n"); + return -EINVAL; + } + + /* Set up image using information in vfb */ + memset(&image, 0, sizeof(image)); + image.sid = res ? res->id : SVGA3D_INVALID_ID; + + cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd)); + + if (unlikely(cmd == NULL)) { + DRM_ERROR("Out of FIFO space binding a screen target\n"); + return -ENOMEM; + } + + cmd->header.id = SVGA_3D_CMD_BIND_GB_SCREENTARGET; + cmd->header.size = sizeof(cmd->body); + + cmd->body.stid = stdu->base.unit; + cmd->body.image = image; + + vmw_fifo_commit(dev_priv, sizeof(*cmd)); + + return 0; +} + + + +/** + * vmw_stdu_update_st - Updates a Screen Target + * + * @dev_priv: VMW DRM device + * @file_priv: Pointer to a drm file private structure + * @stdu: display unit affected + * @update_area: area that needs to be updated + * + * This function needs to be called whenever the content of a screen + * target changes. + * If the display and content buffers are different, then this function does + * a blit first from the content buffer to the display buffer before issuing + * the Screen Target update command. + * + * RETURNS: + * 0 on success, error code on failure + */ +static int vmw_stdu_update_st(struct vmw_private *dev_priv, + struct drm_file *file_priv, + struct vmw_screen_target_display_unit *stdu, + struct drm_clip_rect *update_area) +{ + u32 width, height; + u32 display_update_x, display_update_y; + unsigned short display_x1, display_y1, display_x2, display_y2; + + struct { + SVGA3dCmdHeader header; + SVGA3dCmdUpdateGBScreenTarget body; + } *cmd; + + + if (!stdu->defined) { + DRM_ERROR("No screen target defined"); + return -EINVAL; + } + + /* Display coordinates relative to its position in content surface */ + display_x1 = stdu->base.crtc.x; + display_y1 = stdu->base.crtc.y; + display_x2 = display_x1 + stdu->display_srf->base_size.width; + display_y2 = display_y1 + stdu->display_srf->base_size.height; + + /* Do nothing if the update area is outside of the display surface */ + if (update_area->x2 <= display_x1 || update_area->x1 >= display_x2 || + update_area->y2 <= display_y1 || update_area->y1 >= display_y2) + return 0; + + /* The top-left hand corner of the update area in display surface */ + display_update_x = max(update_area->x1 - display_x1, 0); + display_update_y = max(update_area->y1 - display_y1, 0); + + width = min(update_area->x2, display_x2) - + max(update_area->x1, display_x1); + height = min(update_area->y2, display_y2) - + max(update_area->y1, display_y1); + + if (file_priv && stdu->content_fb_type != SAME_AS_DISPLAY) { + int ret; + + ret = vmw_stdu_content_copy(dev_priv, file_priv, + stdu, + max(update_area->x1, display_x1), + max(update_area->y1, display_y1), + width, height, + display_update_x, display_update_y); + if (unlikely(ret != 0)) { + DRM_ERROR("Failed to blit content\n"); + return ret; + } + } + + cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd)); + + if (unlikely(cmd == NULL)) { + DRM_ERROR("Out of FIFO space updating a Screen Target\n"); + return -ENOMEM; + } + + cmd->header.id = SVGA_3D_CMD_UPDATE_GB_SCREENTARGET; + cmd->header.size = sizeof(cmd->body); + + cmd->body.stid = stdu->base.unit; + cmd->body.rect.x = display_update_x; + cmd->body.rect.y = display_update_y; + cmd->body.rect.w = width; + cmd->body.rect.h = height; + + vmw_fifo_commit(dev_priv, sizeof(*cmd)); + + return 0; +} + + + +/** + * vmw_stdu_destroy_st - Destroy a Screen Target + * + * @dev_priv: VMW DRM device + * @stdu: display unit to destroy + */ +static int vmw_stdu_destroy_st(struct vmw_private *dev_priv, + struct vmw_screen_target_display_unit *stdu) +{ + int ret; + + struct { + SVGA3dCmdHeader header; + SVGA3dCmdDestroyGBScreenTarget body; + } *cmd; + + + /* Nothing to do if not successfully defined */ + if (unlikely(!stdu->defined)) + return 0; + + cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd)); + + if (unlikely(cmd == NULL)) { + DRM_ERROR("Out of FIFO space, screen target not destroyed\n"); + return -ENOMEM; + } + + cmd->header.id = SVGA_3D_CMD_DESTROY_GB_SCREENTARGET; + cmd->header.size = sizeof(cmd->body); + + cmd->body.stid = stdu->base.unit; + + vmw_fifo_commit(dev_priv, sizeof(*cmd)); + + /* Force sync */ + ret = vmw_fallback_wait(dev_priv, false, true, 0, false, 3*HZ); + if (unlikely(ret != 0)) + DRM_ERROR("Failed to sync with HW"); + + stdu->defined = false; + + return ret; +} + + + +/** + * vmw_stdu_crtc_set_config - Sets a mode + * + * @set: mode parameters + * + * This function is the device-specific portion of the DRM CRTC mode set. + * For the SVGA device, we do this by defining a Screen Target, binding a + * GB Surface to that target, and finally update the screen target. + * + * RETURNS: + * 0 on success, error code otherwise + */ +static int vmw_stdu_crtc_set_config(struct drm_mode_set *set) +{ + struct vmw_private *dev_priv; + struct vmw_screen_target_display_unit *stdu; + struct vmw_framebuffer *vfb; + struct vmw_framebuffer_surface *new_vfbs; + struct drm_display_mode *mode; + struct drm_framebuffer *new_fb; + struct drm_crtc *crtc; + struct drm_encoder *encoder; + struct drm_connector *connector; + struct drm_clip_rect update_area = {0}; + int ret; + + + if (!set || !set->crtc) + return -EINVAL; + + crtc = set->crtc; + crtc->x = set->x; + crtc->y = set->y; + stdu = vmw_crtc_to_stdu(crtc); + mode = set->mode; + new_fb = set->fb; + dev_priv = vmw_priv(crtc->dev); + + + if (set->num_connectors > 1) { + DRM_ERROR("Too many connectors\n"); + return -EINVAL; + } + + if (set->num_connectors == 1 && + set->connectors[0] != &stdu->base.connector) { + DRM_ERROR("Connectors don't match %p %p\n", + set->connectors[0], &stdu->base.connector); + return -EINVAL; + } + + + /* Since they always map one to one these are safe */ + connector = &stdu->base.connector; + encoder = &stdu->base.encoder; + + + /* + * After this point the CRTC will be considered off unless a new fb + * is bound + */ + if (stdu->defined) { + /* Unbind current surface by binding an invalid one */ + ret = vmw_stdu_bind_st(dev_priv, stdu, NULL); + if (unlikely(ret != 0)) + return ret; + + /* Update Screen Target, display will now be blank */ + if (crtc->primary->fb) { + update_area.x2 = crtc->primary->fb->width; + update_area.y2 = crtc->primary->fb->height; + + ret = vmw_stdu_update_st(dev_priv, NULL, + stdu, + &update_area); + if (unlikely(ret != 0)) + return ret; + } + + crtc->primary->fb = NULL; + crtc->enabled = false; + encoder->crtc = NULL; + connector->encoder = NULL; + + vmw_stdu_unpin_display(stdu); + stdu->content_fb = NULL; + stdu->content_fb_type = SAME_AS_DISPLAY; + + ret = vmw_stdu_destroy_st(dev_priv, stdu); + /* The hardware is hung, give up */ + if (unlikely(ret != 0)) + return ret; + } + + + /* Any of these conditions means the caller wants CRTC off */ + if (set->num_connectors == 0 || !mode || !new_fb) + return 0; + + + if (set->x + mode->hdisplay > new_fb->width || + set->y + mode->vdisplay > new_fb->height) { + DRM_ERROR("Set outside of framebuffer\n"); + return -EINVAL; + } + + stdu->content_fb = new_fb; + vfb = vmw_framebuffer_to_vfb(stdu->content_fb); + + if (vfb->dmabuf) + stdu->content_fb_type = SEPARATE_DMA; + + /* + * If the requested mode is different than the width and height + * of the FB or if the content buffer is a DMA buf, then allocate + * a display FB that matches the dimension of the mode + */ + if (mode->hdisplay != new_fb->width || + mode->vdisplay != new_fb->height || + stdu->content_fb_type != SAME_AS_DISPLAY) { + struct vmw_surface content_srf; + struct drm_vmw_size display_base_size = {0}; + struct vmw_surface *display_srf; + + + display_base_size.width = mode->hdisplay; + display_base_size.height = mode->vdisplay; + display_base_size.depth = 1; + + /* + * If content buffer is a DMA buf, then we have to construct + * surface info + */ + if (stdu->content_fb_type == SEPARATE_DMA) { + + switch (new_fb->bits_per_pixel) { + case 32: + content_srf.format = SVGA3D_X8R8G8B8; + break; + + case 16: + content_srf.format = SVGA3D_R5G6B5; + break; + + case 8: + content_srf.format = SVGA3D_P8; + break; + + default: + DRM_ERROR("Invalid format\n"); + ret = -EINVAL; + goto err_unref_content; + } + + content_srf.flags = 0; + content_srf.mip_levels[0] = 1; + content_srf.multisample_count = 0; + } else { + + stdu->content_fb_type = SEPARATE_SURFACE; + + new_vfbs = vmw_framebuffer_to_vfbs(new_fb); + content_srf = *new_vfbs->surface; + } + + + ret = vmw_surface_gb_priv_define(crtc->dev, + 0, /* because kernel visible only */ + content_srf.flags, + content_srf.format, + true, /* a scanout buffer */ + content_srf.mip_levels[0], + content_srf.multisample_count, + display_base_size, + &display_srf); + if (unlikely(ret != 0)) { + DRM_ERROR("Cannot allocate a display FB.\n"); + goto err_unref_content; + } + + stdu->display_srf = display_srf; + } else { + new_vfbs = vmw_framebuffer_to_vfbs(new_fb); + stdu->display_srf = new_vfbs->surface; + } + + + ret = vmw_stdu_pin_display(stdu); + if (unlikely(ret != 0)) { + stdu->display_srf = NULL; + goto err_unref_content; + } + + vmw_fb_off(dev_priv); + vmw_svga_enable(dev_priv); + + /* + * Steps to displaying a surface, assume surface is already + * bound: + * 1. define a screen target + * 2. bind a fb to the screen target + * 3. update that screen target (this is done later by + * vmw_kms_stdu_do_surface_dirty_or_present) + */ + ret = vmw_stdu_define_st(dev_priv, stdu); + if (unlikely(ret != 0)) + goto err_unpin_display_and_content; + + ret = vmw_stdu_bind_st(dev_priv, stdu, &stdu->display_srf->res); + if (unlikely(ret != 0)) + goto err_unpin_destroy_st; + + + connector->encoder = encoder; + encoder->crtc = crtc; + + crtc->mode = *mode; + crtc->primary->fb = new_fb; + crtc->enabled = true; + + return ret; + +err_unpin_destroy_st: + vmw_stdu_destroy_st(dev_priv, stdu); +err_unpin_display_and_content: + vmw_stdu_unpin_display(stdu); +err_unref_content: + stdu->content_fb = NULL; + return ret; +} + + + +/** + * vmw_stdu_crtc_page_flip - Binds a buffer to a screen target + * + * @crtc: CRTC to attach FB to + * @fb: FB to attach + * @event: Event to be posted. This event should've been alloced + * using k[mz]alloc, and should've been completely initialized. + * @page_flip_flags: Input flags. + * + * If the STDU uses the same display and content buffers, i.e. a true flip, + * this function will replace the existing display buffer with the new content + * buffer. + * + * If the STDU uses different display and content buffers, i.e. a blit, then + * only the content buffer will be updated. + * + * RETURNS: + * 0 on success, error code on failure + */ +static int vmw_stdu_crtc_page_flip(struct drm_crtc *crtc, + struct drm_framebuffer *new_fb, + struct drm_pending_vblank_event *event, + uint32_t flags) + +{ + struct vmw_private *dev_priv = vmw_priv(crtc->dev); + struct vmw_screen_target_display_unit *stdu; + struct drm_file *file_priv; + struct drm_clip_rect update_area = {0}; + int ret; + + /* + * Temporarily don't support event == NULL. We need the + * @file_priv pointer! + */ + if (event == NULL) + return -EINVAL; + + if (crtc == NULL) + return -EINVAL; + + dev_priv = vmw_priv(crtc->dev); + stdu = vmw_crtc_to_stdu(crtc); + crtc->primary->fb = new_fb; + stdu->content_fb = new_fb; + + if (stdu->display_srf) { + update_area.x2 = stdu->display_srf->base_size.width; + update_area.y2 = stdu->display_srf->base_size.height; + + /* + * If the display surface is the same as the content surface + * then remove the reference + */ + if (stdu->content_fb_type == SAME_AS_DISPLAY) { + if (stdu->defined) { + /* Unbind the current surface */ + ret = vmw_stdu_bind_st(dev_priv, stdu, NULL); + if (unlikely(ret != 0)) + goto err_out; + } + vmw_stdu_unpin_display(stdu); + stdu->display_srf = NULL; + } + } + + + if (!new_fb) { + /* Blanks the display */ + (void) vmw_stdu_update_st(dev_priv, NULL, stdu, &update_area); + + return 0; + } + + + if (stdu->content_fb_type == SAME_AS_DISPLAY) { + stdu->display_srf = vmw_framebuffer_to_vfbs(new_fb)->surface; + ret = vmw_stdu_pin_display(stdu); + if (ret) { + stdu->display_srf = NULL; + goto err_out; + } + + /* Bind display surface */ + ret = vmw_stdu_bind_st(dev_priv, stdu, &stdu->display_srf->res); + if (unlikely(ret != 0)) + goto err_unpin_display_and_content; + } + + /* Update display surface: after this point everything is bound */ + update_area.x2 = stdu->display_srf->base_size.width; + update_area.y2 = stdu->display_srf->base_size.height; + + file_priv = event->base.file_priv; + ret = vmw_stdu_update_st(dev_priv, file_priv, stdu, &update_area); + if (unlikely(ret != 0)) + return ret; + + if (event) { + struct vmw_fence_obj *fence = NULL; + + vmw_execbuf_fence_commands(NULL, dev_priv, &fence, NULL); + if (!fence) + return -ENOMEM; + + ret = vmw_event_fence_action_queue(file_priv, fence, + &event->base, + &event->event.tv_sec, + &event->event.tv_usec, + true); + vmw_fence_obj_unreference(&fence); + } + + return ret; + +err_unpin_display_and_content: + vmw_stdu_unpin_display(stdu); +err_out: + crtc->primary->fb = NULL; + stdu->content_fb = NULL; + return ret; +} + + + +/* + * Screen Target CRTC dispatch table + */ +static struct drm_crtc_funcs vmw_stdu_crtc_funcs = { + .save = vmw_du_crtc_save, + .restore = vmw_du_crtc_restore, + .cursor_set = vmw_du_crtc_cursor_set, + .cursor_move = vmw_du_crtc_cursor_move, + .gamma_set = vmw_du_crtc_gamma_set, + .destroy = vmw_stdu_crtc_destroy, + .set_config = vmw_stdu_crtc_set_config, + .page_flip = vmw_stdu_crtc_page_flip, +}; + + + +/****************************************************************************** + * Screen Target Display Unit Encoder Functions + *****************************************************************************/ + +/** + * vmw_stdu_encoder_destroy - cleans up the STDU + * + * @encoder: used the get the containing STDU + * + * vmwgfx cleans up crtc/encoder/connector all at the same time so technically + * this can be a no-op. Nevertheless, it doesn't hurt of have this in case + * the common KMS code changes and somehow vmw_stdu_crtc_destroy() doesn't + * get called. + */ +static void vmw_stdu_encoder_destroy(struct drm_encoder *encoder) +{ + vmw_stdu_destroy(vmw_encoder_to_stdu(encoder)); +} + +static struct drm_encoder_funcs vmw_stdu_encoder_funcs = { + .destroy = vmw_stdu_encoder_destroy, +}; + + + +/****************************************************************************** + * Screen Target Display Unit Connector Functions + *****************************************************************************/ + +/** + * vmw_stdu_connector_destroy - cleans up the STDU + * + * @connector: used to get the containing STDU + * + * vmwgfx cleans up crtc/encoder/connector all at the same time so technically + * this can be a no-op. Nevertheless, it doesn't hurt of have this in case + * the common KMS code changes and somehow vmw_stdu_crtc_destroy() doesn't + * get called. + */ +static void vmw_stdu_connector_destroy(struct drm_connector *connector) +{ + vmw_stdu_destroy(vmw_connector_to_stdu(connector)); +} + + + +static struct drm_connector_funcs vmw_stdu_connector_funcs = { + .dpms = vmw_du_connector_dpms, + .save = vmw_du_connector_save, + .restore = vmw_du_connector_restore, + .detect = vmw_du_connector_detect, + .fill_modes = vmw_du_connector_fill_modes, + .set_property = vmw_du_connector_set_property, + .destroy = vmw_stdu_connector_destroy, +}; + + + +/** + * vmw_stdu_init - Sets up a Screen Target Display Unit + * + * @dev_priv: VMW DRM device + * @unit: unit number range from 0 to VMWGFX_NUM_DISPLAY_UNITS + * + * This function is called once per CRTC, and allocates one Screen Target + * display unit to represent that CRTC. Since the SVGA device does not separate + * out encoder and connector, they are represented as part of the STDU as well. + */ +static int vmw_stdu_init(struct vmw_private *dev_priv, unsigned unit) +{ + struct vmw_screen_target_display_unit *stdu; + struct drm_device *dev = dev_priv->dev; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_crtc *crtc; + + + stdu = kzalloc(sizeof(*stdu), GFP_KERNEL); + if (!stdu) + return -ENOMEM; + + stdu->base.unit = unit; + crtc = &stdu->base.crtc; + encoder = &stdu->base.encoder; + connector = &stdu->base.connector; + + stdu->base.pref_active = (unit == 0); + stdu->base.pref_width = dev_priv->initial_width; + stdu->base.pref_height = dev_priv->initial_height; + stdu->base.pref_mode = NULL; + stdu->base.is_implicit = true; + + drm_connector_init(dev, connector, &vmw_stdu_connector_funcs, + DRM_MODE_CONNECTOR_VIRTUAL); + connector->status = vmw_du_connector_detect(connector, false); + + drm_encoder_init(dev, encoder, &vmw_stdu_encoder_funcs, + DRM_MODE_ENCODER_VIRTUAL); + drm_mode_connector_attach_encoder(connector, encoder); + encoder->possible_crtcs = (1 << unit); + encoder->possible_clones = 0; + + (void) drm_connector_register(connector); + + drm_crtc_init(dev, crtc, &vmw_stdu_crtc_funcs); + + drm_mode_crtc_set_gamma_size(crtc, 256); + + drm_object_attach_property(&connector->base, + dev->mode_config.dirty_info_property, + 1); + + return 0; +} + + + +/** + * vmw_stdu_destroy - Cleans up a vmw_screen_target_display_unit + * + * @stdu: Screen Target Display Unit to be destroyed + * + * Clean up after vmw_stdu_init + */ +static void vmw_stdu_destroy(struct vmw_screen_target_display_unit *stdu) +{ + vmw_stdu_unpin_display(stdu); + + vmw_du_cleanup(&stdu->base); + kfree(stdu); +} + + + +/****************************************************************************** + * Screen Target Display KMS Functions + * + * These functions are called by the common KMS code in vmwgfx_kms.c + *****************************************************************************/ + +/** + * vmw_kms_stdu_init_display - Initializes a Screen Target based display + * + * @dev_priv: VMW DRM device + * + * This function initialize a Screen Target based display device. It checks + * the capability bits to make sure the underlying hardware can support + * screen targets, and then creates the maximum number of CRTCs, a.k.a Display + * Units, as supported by the display hardware. + * + * RETURNS: + * 0 on success, error code otherwise + */ +int vmw_kms_stdu_init_display(struct vmw_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + int i, ret; + + + /* Do nothing if Screen Target support is turned off */ + if (!VMWGFX_ENABLE_SCREEN_TARGET_OTABLE) + return -ENOSYS; + + if (!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS) || + !(dev_priv->capabilities & SVGA_CAP_3D)) + return -ENOSYS; + + ret = drm_vblank_init(dev, VMWGFX_NUM_DISPLAY_UNITS); + if (unlikely(ret != 0)) + return ret; + + ret = drm_mode_create_dirty_info_property(dev); + if (unlikely(ret != 0)) + goto err_vblank_cleanup; + + for (i = 0; i < VMWGFX_NUM_DISPLAY_UNITS; ++i) { + ret = vmw_stdu_init(dev_priv, i); + + if (unlikely(ret != 0)) { + DRM_ERROR("Failed to initialize STDU %d", i); + goto err_vblank_cleanup; + } + } + + dev_priv->active_display_unit = vmw_du_screen_target; + + DRM_INFO("Screen Target Display device initialized\n"); + + return 0; + +err_vblank_cleanup: + drm_vblank_cleanup(dev); + return ret; +} + + + +/** + * vmw_kms_stdu_close_display - Cleans up after vmw_kms_stdu_init_display + * + * @dev_priv: VMW DRM device + * + * Frees up any resources allocated by vmw_kms_stdu_init_display + * + * RETURNS: + * 0 on success + */ +int vmw_kms_stdu_close_display(struct vmw_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + + drm_vblank_cleanup(dev); + + return 0; +} + + + +/** + * vmw_kms_stdu_do_surface_dirty - updates a dirty rectange to SVGA device + * + * @dev_priv: VMW DRM device + * @file_priv: Pointer to a drm file private structure + * @framebuffer: FB with the new content to be copied to SVGA device + * @clip_rects: array of dirty rectanges + * @num_of_clip_rects: number of rectanges in @clips + * @increment: increment to the next dirty rect in @clips + * + * This function sends an Update command to the SVGA device. This will notify + * the device that a region needs to be copied to the screen. At this time + * we are not coalescing clip rects into one large clip rect because the SVGA + * device will do it for us. + * + * RETURNS: + * 0 on success, error code otherwise + */ +int vmw_kms_stdu_do_surface_dirty(struct vmw_private *dev_priv, + struct drm_file *file_priv, + struct vmw_framebuffer *framebuffer, + struct drm_clip_rect *clip_rects, + unsigned num_of_clip_rects, int increment) +{ + struct vmw_screen_target_display_unit *stdu[VMWGFX_NUM_DISPLAY_UNITS]; + struct drm_clip_rect *cur_rect; + struct drm_crtc *crtc; + + unsigned num_of_du = 0, cur_du, count = 0; + int ret = 0; + + + BUG_ON(!clip_rects || !num_of_clip_rects); + + /* Figure out all the DU affected by this surface */ + list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list, + head) { + if (crtc->primary->fb != &framebuffer->base) + continue; + + stdu[num_of_du++] = vmw_crtc_to_stdu(crtc); + } + + for (cur_du = 0; cur_du < num_of_du; cur_du++) + for (cur_rect = clip_rects, count = 0; + count < num_of_clip_rects && ret == 0; + cur_rect += increment, count++) { + ret = vmw_stdu_update_st(dev_priv, file_priv, + stdu[cur_du], + cur_rect); + } + + return ret; +} + + + +/** + * vmw_kms_stdu_present - present a surface to the display surface + * + * @dev_priv: VMW DRM device + * @file_priv: Pointer to a drm file private structure + * @vfb: Used to pick which STDU(s) is affected + * @user_handle: user handle for the source surface + * @dest_x: top/left corner of the display area to blit to + * @dest_y: top/left corner of the display area to blit to + * @clip_rects: array of dirty rectanges + * @num_of_clip_rects: number of rectanges in @clips + * + * This function copies a surface onto the display surface, and + * updates the screen target. Strech blit is currently not + * supported. + * + * RETURNS: + * 0 on success, error code otherwise + */ +int vmw_kms_stdu_present(struct vmw_private *dev_priv, + struct drm_file *file_priv, + struct vmw_framebuffer *vfb, + uint32_t user_handle, + int32_t dest_x, int32_t dest_y, + struct drm_vmw_rect *clip_rects, + uint32_t num_of_clip_rects) +{ + struct vmw_screen_target_display_unit *stdu[VMWGFX_NUM_DISPLAY_UNITS]; + struct drm_clip_rect *update_area; + struct drm_crtc *crtc; + size_t fifo_size; + int num_of_du = 0, cur_du, i; + int ret = 0; + struct vmw_clip_rect src_bb; + + struct { + SVGA3dCmdHeader header; + SVGA3dCmdSurfaceCopy body; + } *cmd; + SVGA3dCopyBox *blits; + + + BUG_ON(!clip_rects || !num_of_clip_rects); + + list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list, head) { + if (crtc->primary->fb != &vfb->base) + continue; + + stdu[num_of_du++] = vmw_crtc_to_stdu(crtc); + } + + + update_area = kcalloc(num_of_clip_rects, sizeof(*update_area), + GFP_KERNEL); + if (unlikely(update_area == NULL)) { + DRM_ERROR("Temporary clip rect memory alloc failed.\n"); + return -ENOMEM; + } + + + fifo_size = sizeof(*cmd) + sizeof(SVGA3dCopyBox) * num_of_clip_rects; + + cmd = kmalloc(fifo_size, GFP_KERNEL); + if (unlikely(cmd == NULL)) { + DRM_ERROR("Failed to allocate memory for surface copy.\n"); + ret = -ENOMEM; + goto out_free_update_area; + } + + memset(cmd, 0, fifo_size); + cmd->header.id = SVGA_3D_CMD_SURFACE_COPY; + + blits = (SVGA3dCopyBox *)&cmd[1]; + + + /* Figure out the source bounding box */ + src_bb.x1 = clip_rects->x; + src_bb.y1 = clip_rects->y; + src_bb.x2 = clip_rects->x + clip_rects->w; + src_bb.y2 = clip_rects->y + clip_rects->h; + + for (i = 1; i < num_of_clip_rects; i++) { + src_bb.x1 = min_t(int, src_bb.x1, clip_rects[i].x); + src_bb.x2 = max_t(int, src_bb.x2, + clip_rects[i].x + (int) clip_rects[i].w); + src_bb.y1 = min_t(int, src_bb.y1, clip_rects[i].y); + src_bb.y2 = max_t(int, src_bb.y2, + clip_rects[i].y + (int) clip_rects[i].h); + } + + for (i = 0; i < num_of_clip_rects; i++) { + update_area[i].x1 = clip_rects[i].x - src_bb.x1; + update_area[i].x2 = update_area[i].x1 + clip_rects[i].w; + update_area[i].y1 = clip_rects[i].y - src_bb.y1; + update_area[i].y2 = update_area[i].y1 + clip_rects[i].h; + } + + + for (cur_du = 0; cur_du < num_of_du; cur_du++) { + struct vmw_clip_rect dest_bb; + int num_of_blits; + + crtc = &stdu[cur_du]->base.crtc; + + dest_bb.x1 = src_bb.x1 + dest_x - crtc->x; + dest_bb.y1 = src_bb.y1 + dest_y - crtc->y; + dest_bb.x2 = src_bb.x2 + dest_x - crtc->x; + dest_bb.y2 = src_bb.y2 + dest_y - crtc->y; + + /* Skip any STDU outside of the destination bounding box */ + if (dest_bb.x1 >= crtc->mode.hdisplay || + dest_bb.y1 >= crtc->mode.vdisplay || + dest_bb.x2 <= 0 || dest_bb.y2 <= 0) + continue; + + /* Normalize to top-left of src bounding box in dest coord */ + dest_bb.x2 = crtc->mode.hdisplay - dest_bb.x1; + dest_bb.y2 = crtc->mode.vdisplay - dest_bb.y1; + dest_bb.x1 = 0 - dest_bb.x1; + dest_bb.y1 = 0 - dest_bb.y1; + + for (i = 0, num_of_blits = 0; i < num_of_clip_rects; i++) { + int x1 = max_t(int, dest_bb.x1, (int)update_area[i].x1); + int y1 = max_t(int, dest_bb.y1, (int)update_area[i].y1); + int x2 = min_t(int, dest_bb.x2, (int)update_area[i].x2); + int y2 = min_t(int, dest_bb.y2, (int)update_area[i].y2); + + if (x1 >= x2) + continue; + + if (y1 >= y2) + continue; + + blits[num_of_blits].srcx = src_bb.x1 + x1; + blits[num_of_blits].srcy = src_bb.y1 + y1; + blits[num_of_blits].x = -dest_bb.x1 + x1; + blits[num_of_blits].y = -dest_bb.y1 + y1; + blits[num_of_blits].d = 1; + blits[num_of_blits].w = x2 - x1; + blits[num_of_blits].h = y2 - y1; + num_of_blits++; + } + + if (num_of_blits == 0) + continue; + + /* Calculate new command size */ + fifo_size = sizeof(*cmd) + sizeof(SVGA3dCopyBox) * num_of_blits; + + cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header)); + + cmd->body.src.sid = user_handle; + cmd->body.dest.sid = stdu[cur_du]->display_srf->res.id; + + ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd, + fifo_size, 0, VMW_QUIRK_SCREENTARGET, + NULL, NULL); + + if (unlikely(ret != 0)) + break; + + for (i = 0; i < num_of_blits; i++) { + struct drm_clip_rect blit_area; + + /* + * Add crtc offset because vmw_stdu_update_st expects + * desktop coordinates + */ + blit_area.x1 = blits[i].x + crtc->x; + blit_area.x2 = blit_area.x1 + blits[i].w; + blit_area.y1 = blits[i].y + crtc->y; + blit_area.y2 = blit_area.y1 + blits[i].h; + (void) vmw_stdu_update_st(dev_priv, NULL, stdu[cur_du], + &blit_area); + } + } + + kfree(cmd); + +out_free_update_area: + kfree(update_area); + + return ret; +} diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index fb54ccd..835f343 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -1486,6 +1486,10 @@ int vmw_surface_gb_priv_define(struct drm_device *dev, srf->mip_levels[0], srf->flags & SVGA3D_SURFACE_CUBEMAP);
+ if (dev_priv->active_display_unit == vmw_du_screen_target && + for_scanout) + srf->flags |= SVGA3D_SURFACE_SCREENTARGET; + /* * From this point, the generic resource management functions * destroy the object on failure. diff --git a/include/uapi/drm/vmwgfx_drm.h b/include/uapi/drm/vmwgfx_drm.h index c472bedb..c8a8631 100644 --- a/include/uapi/drm/vmwgfx_drm.h +++ b/include/uapi/drm/vmwgfx_drm.h @@ -88,6 +88,7 @@ #define DRM_VMW_PARAM_3D_CAPS_SIZE 8 #define DRM_VMW_PARAM_MAX_MOB_MEMORY 9 #define DRM_VMW_PARAM_MAX_MOB_SIZE 10 +#define DRM_VMW_PARAM_SCREEN_TARGET 11
/** * enum drm_vmw_handle_type - handle type for ref ioctls