Neither source split nor multirect are properly supported at this moment. Both of these checks depend on zpos being equal for several planes (which is a clear userspace bug). Drop these checks to simplify dpu_crtc_atomic_check(). The actual support for either of these features is not removed from the backend code (sspp, ctl, etc).
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 128 +---------------------- 1 file changed, 4 insertions(+), 124 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c index 6fe0af9ffc23..f311cdbfe7d2 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c @@ -895,12 +895,8 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc, struct drm_plane *plane; struct drm_display_mode *mode;
- int cnt = 0, rc = 0, mixer_width = 0, i, z_pos; + int cnt = 0, rc = 0, i;
- struct dpu_multirect_plane_states multirect_plane[DPU_STAGE_MAX * 2]; - int multirect_count = 0; - const struct drm_plane_state *pipe_staged[SSPP_MAX]; - int left_zpos_cnt = 0, right_zpos_cnt = 0; struct drm_rect crtc_rect = { 0 };
pstates = kzalloc(sizeof(*pstates) * DPU_STAGE_MAX * 4, GFP_KERNEL); @@ -920,13 +916,8 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc, if (crtc_state->active_changed) crtc_state->mode_changed = true;
- memset(pipe_staged, 0, sizeof(pipe_staged)); - - if (cstate->num_mixers) { - mixer_width = mode->hdisplay / cstate->num_mixers; - + if (cstate->num_mixers) _dpu_crtc_setup_lm_bounds(crtc, crtc_state); - }
crtc_rect.x2 = mode->hdisplay; crtc_rect.y2 = mode->vdisplay; @@ -947,18 +938,8 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc, pstates[cnt].dpu_pstate = to_dpu_plane_state(pstate); pstates[cnt].drm_pstate = pstate; pstates[cnt].stage = pstate->normalized_zpos; - pstates[cnt].pipe_id = dpu_plane_pipe(plane);
- if (pipe_staged[pstates[cnt].pipe_id]) { - multirect_plane[multirect_count].r0 = - pipe_staged[pstates[cnt].pipe_id]; - multirect_plane[multirect_count].r1 = pstate; - multirect_count++; - - pipe_staged[pstates[cnt].pipe_id] = NULL; - } else { - pipe_staged[pstates[cnt].pipe_id] = pstate; - } + dpu_plane_clear_multirect(pstate);
cnt++;
@@ -973,19 +954,8 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc, } }
- for (i = 1; i < SSPP_MAX; i++) { - if (pipe_staged[i]) - dpu_plane_clear_multirect(pipe_staged[i]); - } - - z_pos = -1; for (i = 0; i < cnt; i++) { - /* reset counts at every new blend stage */ - if (pstates[i].stage != z_pos) { - left_zpos_cnt = 0; - right_zpos_cnt = 0; - z_pos = pstates[i].stage; - } + int z_pos = pstates[i].stage;
/* verify z_pos setting before using it */ if (z_pos >= DPU_STAGE_MAX - DPU_STAGE_0) { @@ -993,40 +963,12 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc, DPU_STAGE_MAX - DPU_STAGE_0); rc = -EINVAL; goto end; - } else if (pstates[i].drm_pstate->crtc_x < mixer_width) { - if (left_zpos_cnt == 2) { - DPU_ERROR("> 2 planes @ stage %d on left\n", - z_pos); - rc = -EINVAL; - goto end; - } - left_zpos_cnt++; - - } else { - if (right_zpos_cnt == 2) { - DPU_ERROR("> 2 planes @ stage %d on right\n", - z_pos); - rc = -EINVAL; - goto end; - } - right_zpos_cnt++; }
pstates[i].dpu_pstate->stage = z_pos + DPU_STAGE_0; DRM_DEBUG_ATOMIC("%s: zpos %d\n", dpu_crtc->name, z_pos); }
- for (i = 0; i < multirect_count; i++) { - if (dpu_plane_validate_multirect_v2(&multirect_plane[i])) { - DPU_ERROR( - "multirect validation failed for planes (%d - %d)\n", - multirect_plane[i].r0->plane->base.id, - multirect_plane[i].r1->plane->base.id); - rc = -EINVAL; - goto end; - } - } - atomic_inc(&_dpu_crtc_get_kms(crtc)->bandwidth_ref);
rc = dpu_core_perf_crtc_check(crtc, crtc_state); @@ -1036,68 +978,6 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc, goto end; }
- /* validate source split: - * use pstates sorted by stage to check planes on same stage - * we assume that all pipes are in source split so its valid to compare - * without taking into account left/right mixer placement - */ - for (i = 1; i < cnt; i++) { - struct plane_state *prv_pstate, *cur_pstate; - struct drm_rect left_rect, right_rect; - int32_t left_pid, right_pid; - int32_t stage; - - prv_pstate = &pstates[i - 1]; - cur_pstate = &pstates[i]; - if (prv_pstate->stage != cur_pstate->stage) - continue; - - stage = cur_pstate->stage; - - left_pid = prv_pstate->dpu_pstate->base.plane->base.id; - left_rect = drm_plane_state_dest(prv_pstate->drm_pstate); - - right_pid = cur_pstate->dpu_pstate->base.plane->base.id; - right_rect = drm_plane_state_dest(cur_pstate->drm_pstate); - - if (right_rect.x1 < left_rect.x1) { - swap(left_pid, right_pid); - swap(left_rect, right_rect); - } - - /** - * - planes are enumerated in pipe-priority order such that - * planes with lower drm_id must be left-most in a shared - * blend-stage when using source split. - * - planes in source split must be contiguous in width - * - planes in source split must have same dest yoff and height - */ - if (right_pid < left_pid) { - DPU_ERROR( - "invalid src split cfg. priority mismatch. stage: %d left: %d right: %d\n", - stage, left_pid, right_pid); - rc = -EINVAL; - goto end; - } else if (right_rect.x1 != drm_rect_width(&left_rect)) { - DPU_ERROR("non-contiguous coordinates for src split. " - "stage: %d left: " DRM_RECT_FMT " right: " - DRM_RECT_FMT "\n", stage, - DRM_RECT_ARG(&left_rect), - DRM_RECT_ARG(&right_rect)); - rc = -EINVAL; - goto end; - } else if (left_rect.y1 != right_rect.y1 || - drm_rect_height(&left_rect) != drm_rect_height(&right_rect)) { - DPU_ERROR("source split at stage: %d. invalid " - "yoff/height: left: " DRM_RECT_FMT " right: " - DRM_RECT_FMT "\n", stage, - DRM_RECT_ARG(&left_rect), - DRM_RECT_ARG(&right_rect)); - rc = -EINVAL; - goto end; - } - } - end: kfree(pstates); return rc;