Add the required changes to support 7nm pll/phy in CPHY mode.
This adds a "qcom,dsi-phy-cphy-mode" property for the PHY node to enable the CPHY mode.
v2: - rebased on DSI PHY reworks - reworked getting cphy_mode in dsi_host.c - documentation change in separate patch
v3: - yaml bindings - changed binding to "phy-type = <PHY_TYPE_DSI_CPHY>;"
v4: - PHY_TYPE_{DPHY,CPHY} instead of PHY_TYPE_DSI_{DPHY,CPHY} - use enum/default for phy-type property - remove a stray semicolon in dts example
Jonathan Marek (3): dt-bindings: msm: dsi: add missing 7nm bindings dt-bindings: msm: dsi: document phy-type property for 7nm dsi phy drm/msm/dsi: support CPHY mode for 7nm pll/phy
.../bindings/display/msm/dsi-phy-7nm.yaml | 71 +++++++++ drivers/gpu/drm/msm/dsi/dsi.xml.h | 2 + drivers/gpu/drm/msm/dsi/dsi_host.c | 34 +++- drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 49 ++++++ drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 3 + drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 145 ++++++++++++------ include/dt-bindings/phy/phy.h | 2 + 7 files changed, 259 insertions(+), 47 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml