On 11/16/2016 01:21 PM, Marek Vasut wrote:
Add new DT bindings for new MXSFB driver that is using the OF graph to parse the video output structure instead of hard-coding the display properties into the MXSFB node. The old MXSFB fbdev driver bindings are preserved in the same file in the "Old bindings" section.
Signed-off-by: Marek Vasut marex@denx.de Cc: Rob Herring robh@kernel.org Cc: Lucas Stach l.stach@pengutronix.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Shawn Guo shawnguo@kernel.org -- V2: - Merge the new bindings into mxsfb.txt file instead of keeping them in separate mxsfb-drm.txt file. - Add dedicated compatible for i.MX6SX - Drop all references to DRM/KMS - Repair the required bits in clock node V3: - Replace lcdif with LCDIF, lcdif@0 with display-controller@, Old with Deprecated to address V2 feedback
Bump ?
.../devicetree/bindings/display/mxsfb.txt | 41 ++++++++++++++++++++-- 1 file changed, 39 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt index a4431f2..472e1ea 100644 --- a/Documentation/devicetree/bindings/display/mxsfb.txt +++ b/Documentation/devicetree/bindings/display/mxsfb.txt @@ -1,10 +1,47 @@
- Freescale MXS LCD Interface (LCDIF)
+New bindings: +============= Required properties:
- compatible: Should be "fsl,imx23-lcdif" for i.MX23. Should be "fsl,imx28-lcdif" for i.MX28.
-- reg: Address and length of the register set for lcdif -- interrupts: Should contain lcdif interrupts
Should be "fsl,imx6sx-lcdif" for i.MX6SX.+- reg: Address and length of the register set for LCDIF +- interrupts: Should contain LCDIF interrupt +- clocks: A list of phandle + clock-specifier pairs, one for each
entry in 'clock-names'.+- clock-names: A list of clock names. For MXSFB it should contain:
- "pix" for the LCDIF block clock
- (MX6SX-only) "axi", "disp_axi" for the bus interface clock
+Required sub-nodes:
- port: The connection to an encoder chip.
+Example:
- lcdif1: display-controller@2220000 {
compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";reg = <0x02220000 0x4000>;interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,<&clks IMX6SX_CLK_LCDIF_APB>,<&clks IMX6SX_CLK_DISPLAY_AXI>;clock-names = "pix", "axi", "disp_axi";port {parallel_out: endpoint {remote-endpoint = <&panel_in_parallel>;};};- };
+Deprecated bindings: +==================== +Required properties: +- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
Should be "fsl,imx28-lcdif" for i.MX28.+- reg: Address and length of the register set for LCDIF +- interrupts: Should contain LCDIF interrupts
- display: phandle to display node (see below for details)
- display node