Wrap FIFO reset and comments into mxsfb_reset_block(), this is a clean up. No functional change.
Signed-off-by: Marek Vasut marex@denx.de Cc: Alexander Stein alexander.stein@ew.tq-group.com Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Lucas Stach l.stach@pengutronix.de Cc: Peng Fan peng.fan@nxp.com Cc: Robby Cai robby.cai@nxp.com Cc: Sam Ravnborg sam@ravnborg.org Cc: Stefan Agner stefan@agner.ch --- V2: No change --- drivers/gpu/drm/mxsfb/mxsfb_kms.c | 36 +++++++++++++++++-------------- 1 file changed, 20 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_kms.c b/drivers/gpu/drm/mxsfb/mxsfb_kms.c index 657b6afbbf1f9..015b289d93a3c 100644 --- a/drivers/gpu/drm/mxsfb/mxsfb_kms.c +++ b/drivers/gpu/drm/mxsfb/mxsfb_kms.c @@ -183,6 +183,12 @@ static int mxsfb_reset_block(struct mxsfb_drm_private *mxsfb) { int ret;
+ /* + * It seems, you can't re-program the controller if it is still + * running. This may lead to shifted pictures (FIFO issue?), so + * first stop the controller and drain its FIFOs. + */ + ret = clear_poll_bit(mxsfb->base + LCDC_CTRL, CTRL_SFTRST); if (ret) return ret; @@ -193,7 +199,20 @@ static int mxsfb_reset_block(struct mxsfb_drm_private *mxsfb) if (ret) return ret;
- return clear_poll_bit(mxsfb->base + LCDC_CTRL, CTRL_CLKGATE); + ret = clear_poll_bit(mxsfb->base + LCDC_CTRL, CTRL_CLKGATE); + if (ret) + return ret; + + /* Clear the FIFOs */ + writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET); + readl(mxsfb->base + LCDC_CTRL1); + writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_CLR); + readl(mxsfb->base + LCDC_CTRL1); + + if (mxsfb->devdata->has_overlay) + writel(0, mxsfb->base + LCDC_AS_CTRL); + + return 0; }
static dma_addr_t mxsfb_get_fb_paddr(struct drm_plane *plane) @@ -220,26 +239,11 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb, u32 vdctrl0, vsync_pulse_len, hsync_pulse_len; int err;
- /* - * It seems, you can't re-program the controller if it is still - * running. This may lead to shifted pictures (FIFO issue?), so - * first stop the controller and drain its FIFOs. - */ - /* Mandatory eLCDIF reset as per the Reference Manual */ err = mxsfb_reset_block(mxsfb); if (err) return;
- /* Clear the FIFOs */ - writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET); - readl(mxsfb->base + LCDC_CTRL1); - writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_CLR); - readl(mxsfb->base + LCDC_CTRL1); - - if (mxsfb->devdata->has_overlay) - writel(0, mxsfb->base + LCDC_AS_CTRL); - mxsfb_set_formats(mxsfb, bus_format);
if (mxsfb->bridge && mxsfb->bridge->timings)