The util mkregtable includes a copy of the kernel API for linked lists, only a small subset of it is used. Delete the unused functions and macros.
Signed-off-by: Matthias Kaehlcke mka@chromium.org --- drivers/gpu/drm/radeon/mkregtable.c | 433 ---------------------------- 1 file changed, 433 deletions(-)
diff --git a/drivers/gpu/drm/radeon/mkregtable.c b/drivers/gpu/drm/radeon/mkregtable.c index c21d8fa591ef..ba704633b072 100644 --- a/drivers/gpu/drm/radeon/mkregtable.c +++ b/drivers/gpu/drm/radeon/mkregtable.c @@ -43,10 +43,6 @@ struct list_head { struct list_head *next, *prev; };
-#define LIST_HEAD_INIT(name) { &(name), &(name) } - -#define LIST_HEAD(name) \ - struct list_head name = LIST_HEAD_INIT(name)
static inline void INIT_LIST_HEAD(struct list_head *list) { @@ -74,19 +70,6 @@ extern void __list_add(struct list_head *new, struct list_head *prev, struct list_head *next); #endif
-/** - * list_add - add a new entry - * @new: new entry to be added - * @head: list head to add it after - * - * Insert a new entry after the specified head. - * This is good for implementing stacks. - */ -static inline void list_add(struct list_head *new, struct list_head *head) -{ - __list_add(new, head, head->next); -} - /** * list_add_tail - add a new entry * @new: new entry to be added @@ -100,250 +83,6 @@ static inline void list_add_tail(struct list_head *new, struct list_head *head) __list_add(new, head->prev, head); }
-/* - * Delete a list entry by making the prev/next entries - * point to each other. - * - * This is only for internal list manipulation where we know - * the prev/next entries already! - */ -static inline void __list_del(struct list_head *prev, struct list_head *next) -{ - next->prev = prev; - prev->next = next; -} - -/** - * list_del - deletes entry from list. - * @entry: the element to delete from the list. - * Note: list_empty() on entry does not return true after this, the entry is - * in an undefined state. - */ -#ifndef CONFIG_DEBUG_LIST -static inline void list_del(struct list_head *entry) -{ - __list_del(entry->prev, entry->next); - entry->next = (void *)0xDEADBEEF; - entry->prev = (void *)0xBEEFDEAD; -} -#else -extern void list_del(struct list_head *entry); -#endif - -/** - * list_replace - replace old entry by new one - * @old : the element to be replaced - * @new : the new element to insert - * - * If @old was empty, it will be overwritten. - */ -static inline void list_replace(struct list_head *old, struct list_head *new) -{ - new->next = old->next; - new->next->prev = new; - new->prev = old->prev; - new->prev->next = new; -} - -static inline void list_replace_init(struct list_head *old, - struct list_head *new) -{ - list_replace(old, new); - INIT_LIST_HEAD(old); -} - -/** - * list_del_init - deletes entry from list and reinitialize it. - * @entry: the element to delete from the list. - */ -static inline void list_del_init(struct list_head *entry) -{ - __list_del(entry->prev, entry->next); - INIT_LIST_HEAD(entry); -} - -/** - * list_move - delete from one list and add as another's head - * @list: the entry to move - * @head: the head that will precede our entry - */ -static inline void list_move(struct list_head *list, struct list_head *head) -{ - __list_del(list->prev, list->next); - list_add(list, head); -} - -/** - * list_move_tail - delete from one list and add as another's tail - * @list: the entry to move - * @head: the head that will follow our entry - */ -static inline void list_move_tail(struct list_head *list, - struct list_head *head) -{ - __list_del(list->prev, list->next); - list_add_tail(list, head); -} - -/** - * list_is_last - tests whether @list is the last entry in list @head - * @list: the entry to test - * @head: the head of the list - */ -static inline int list_is_last(const struct list_head *list, - const struct list_head *head) -{ - return list->next == head; -} - -/** - * list_empty - tests whether a list is empty - * @head: the list to test. - */ -static inline int list_empty(const struct list_head *head) -{ - return head->next == head; -} - -/** - * list_empty_careful - tests whether a list is empty and not being modified - * @head: the list to test - * - * Description: - * tests whether a list is empty _and_ checks that no other CPU might be - * in the process of modifying either member (next or prev) - * - * NOTE: using list_empty_careful() without synchronization - * can only be safe if the only activity that can happen - * to the list entry is list_del_init(). Eg. it cannot be used - * if another CPU could re-list_add() it. - */ -static inline int list_empty_careful(const struct list_head *head) -{ - struct list_head *next = head->next; - return (next == head) && (next == head->prev); -} - -/** - * list_is_singular - tests whether a list has just one entry. - * @head: the list to test. - */ -static inline int list_is_singular(const struct list_head *head) -{ - return !list_empty(head) && (head->next == head->prev); -} - -static inline void __list_cut_position(struct list_head *list, - struct list_head *head, - struct list_head *entry) -{ - struct list_head *new_first = entry->next; - list->next = head->next; - list->next->prev = list; - list->prev = entry; - entry->next = list; - head->next = new_first; - new_first->prev = head; -} - -/** - * list_cut_position - cut a list into two - * @list: a new list to add all removed entries - * @head: a list with entries - * @entry: an entry within head, could be the head itself - * and if so we won't cut the list - * - * This helper moves the initial part of @head, up to and - * including @entry, from @head to @list. You should - * pass on @entry an element you know is on @head. @list - * should be an empty list or a list you do not care about - * losing its data. - * - */ -static inline void list_cut_position(struct list_head *list, - struct list_head *head, - struct list_head *entry) -{ - if (list_empty(head)) - return; - if (list_is_singular(head) && (head->next != entry && head != entry)) - return; - if (entry == head) - INIT_LIST_HEAD(list); - else - __list_cut_position(list, head, entry); -} - -static inline void __list_splice(const struct list_head *list, - struct list_head *prev, struct list_head *next) -{ - struct list_head *first = list->next; - struct list_head *last = list->prev; - - first->prev = prev; - prev->next = first; - - last->next = next; - next->prev = last; -} - -/** - * list_splice - join two lists, this is designed for stacks - * @list: the new list to add. - * @head: the place to add it in the first list. - */ -static inline void list_splice(const struct list_head *list, - struct list_head *head) -{ - if (!list_empty(list)) - __list_splice(list, head, head->next); -} - -/** - * list_splice_tail - join two lists, each list being a queue - * @list: the new list to add. - * @head: the place to add it in the first list. - */ -static inline void list_splice_tail(struct list_head *list, - struct list_head *head) -{ - if (!list_empty(list)) - __list_splice(list, head->prev, head); -} - -/** - * list_splice_init - join two lists and reinitialise the emptied list. - * @list: the new list to add. - * @head: the place to add it in the first list. - * - * The list at @list is reinitialised - */ -static inline void list_splice_init(struct list_head *list, - struct list_head *head) -{ - if (!list_empty(list)) { - __list_splice(list, head, head->next); - INIT_LIST_HEAD(list); - } -} - -/** - * list_splice_tail_init - join two lists and reinitialise the emptied list - * @list: the new list to add. - * @head: the place to add it in the first list. - * - * Each of the lists is a queue. - * The list at @list is reinitialised - */ -static inline void list_splice_tail_init(struct list_head *list, - struct list_head *head) -{ - if (!list_empty(list)) { - __list_splice(list, head->prev, head); - INIT_LIST_HEAD(list); - } -} - /** * list_entry - get the struct for this entry * @ptr: the &struct list_head pointer. @@ -353,56 +92,6 @@ static inline void list_splice_tail_init(struct list_head *list, #define list_entry(ptr, type, member) \ container_of(ptr, type, member)
-/** - * list_first_entry - get the first element from a list - * @ptr: the list head to take the element from. - * @type: the type of the struct this is embedded in. - * @member: the name of the list_head within the struct. - * - * Note, that list is expected to be not empty. - */ -#define list_first_entry(ptr, type, member) \ - list_entry((ptr)->next, type, member) - -/** - * list_for_each - iterate over a list - * @pos: the &struct list_head to use as a loop cursor. - * @head: the head for your list. - */ -#define list_for_each(pos, head) \ - for (pos = (head)->next; prefetch(pos->next), pos != (head); \ - pos = pos->next) - -/** - * list_for_each_prev - iterate over a list backwards - * @pos: the &struct list_head to use as a loop cursor. - * @head: the head for your list. - */ -#define list_for_each_prev(pos, head) \ - for (pos = (head)->prev; prefetch(pos->prev), pos != (head); \ - pos = pos->prev) - -/** - * list_for_each_safe - iterate over a list safe against removal of list entry - * @pos: the &struct list_head to use as a loop cursor. - * @n: another &struct list_head to use as temporary storage - * @head: the head for your list. - */ -#define list_for_each_safe(pos, n, head) \ - for (pos = (head)->next, n = pos->next; pos != (head); \ - pos = n, n = pos->next) - -/** - * list_for_each_prev_safe - iterate over a list backwards safe against removal of list entry - * @pos: the &struct list_head to use as a loop cursor. - * @n: another &struct list_head to use as temporary storage - * @head: the head for your list. - */ -#define list_for_each_prev_safe(pos, n, head) \ - for (pos = (head)->prev, n = pos->prev; \ - prefetch(pos->prev), pos != (head); \ - pos = n, n = pos->prev) - /** * list_for_each_entry - iterate over list of given type * @pos: the type * to use as a loop cursor. @@ -414,128 +103,6 @@ static inline void list_splice_tail_init(struct list_head *list, &pos->member != (head); \ pos = list_entry(pos->member.next, typeof(*pos), member))
-/** - * list_for_each_entry_reverse - iterate backwards over list of given type. - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_head within the struct. - */ -#define list_for_each_entry_reverse(pos, head, member) \ - for (pos = list_entry((head)->prev, typeof(*pos), member); \ - prefetch(pos->member.prev), &pos->member != (head); \ - pos = list_entry(pos->member.prev, typeof(*pos), member)) - -/** - * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue() - * @pos: the type * to use as a start point - * @head: the head of the list - * @member: the name of the list_head within the struct. - * - * Prepares a pos entry for use as a start point in list_for_each_entry_continue(). - */ -#define list_prepare_entry(pos, head, member) \ - ((pos) ? : list_entry(head, typeof(*pos), member)) - -/** - * list_for_each_entry_continue - continue iteration over list of given type - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Continue to iterate over list of given type, continuing after - * the current position. - */ -#define list_for_each_entry_continue(pos, head, member) \ - for (pos = list_entry(pos->member.next, typeof(*pos), member); \ - prefetch(pos->member.next), &pos->member != (head); \ - pos = list_entry(pos->member.next, typeof(*pos), member)) - -/** - * list_for_each_entry_continue_reverse - iterate backwards from the given point - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Start to iterate over list of given type backwards, continuing after - * the current position. - */ -#define list_for_each_entry_continue_reverse(pos, head, member) \ - for (pos = list_entry(pos->member.prev, typeof(*pos), member); \ - prefetch(pos->member.prev), &pos->member != (head); \ - pos = list_entry(pos->member.prev, typeof(*pos), member)) - -/** - * list_for_each_entry_from - iterate over list of given type from the current point - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Iterate over list of given type, continuing from current position. - */ -#define list_for_each_entry_from(pos, head, member) \ - for (; prefetch(pos->member.next), &pos->member != (head); \ - pos = list_entry(pos->member.next, typeof(*pos), member)) - -/** - * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry - * @pos: the type * to use as a loop cursor. - * @n: another type * to use as temporary storage - * @head: the head for your list. - * @member: the name of the list_head within the struct. - */ -#define list_for_each_entry_safe(pos, n, head, member) \ - for (pos = list_entry((head)->next, typeof(*pos), member), \ - n = list_entry(pos->member.next, typeof(*pos), member); \ - &pos->member != (head); \ - pos = n, n = list_entry(n->member.next, typeof(*n), member)) - -/** - * list_for_each_entry_safe_continue - * @pos: the type * to use as a loop cursor. - * @n: another type * to use as temporary storage - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Iterate over list of given type, continuing after current point, - * safe against removal of list entry. - */ -#define list_for_each_entry_safe_continue(pos, n, head, member) \ - for (pos = list_entry(pos->member.next, typeof(*pos), member), \ - n = list_entry(pos->member.next, typeof(*pos), member); \ - &pos->member != (head); \ - pos = n, n = list_entry(n->member.next, typeof(*n), member)) - -/** - * list_for_each_entry_safe_from - * @pos: the type * to use as a loop cursor. - * @n: another type * to use as temporary storage - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Iterate over list of given type from current point, safe against - * removal of list entry. - */ -#define list_for_each_entry_safe_from(pos, n, head, member) \ - for (n = list_entry(pos->member.next, typeof(*pos), member); \ - &pos->member != (head); \ - pos = n, n = list_entry(n->member.next, typeof(*n), member)) - -/** - * list_for_each_entry_safe_reverse - * @pos: the type * to use as a loop cursor. - * @n: another type * to use as temporary storage - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Iterate backwards over list of given type, safe against removal - * of list entry. - */ -#define list_for_each_entry_safe_reverse(pos, n, head, member) \ - for (pos = list_entry((head)->prev, typeof(*pos), member), \ - n = list_entry(pos->member.prev, typeof(*pos), member); \ - &pos->member != (head); \ - pos = n, n = list_entry(n->member.prev, typeof(*n), member)) - struct offset { struct list_head list; unsigned offset;