From: Hans Verkuil hans.verkuil@cisco.com
A big problem with DP CEC-Tunneling-over-AUX is that it is tricky to find adapters with a chipset that supports this AND where the manufacturer actually connected the HDMI CEC line to the chipset.
Add a mention of the MegaChips 2900 chipset which seems to support this feature well.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com --- drivers/gpu/drm/drm_dp_cec.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_dp_cec.c b/drivers/gpu/drm/drm_dp_cec.c index 1407b13a8d5d..8a718f85079a 100644 --- a/drivers/gpu/drm/drm_dp_cec.c +++ b/drivers/gpu/drm/drm_dp_cec.c @@ -16,7 +16,9 @@ * here. Quite a few active (mini-)DP-to-HDMI or USB-C-to-HDMI adapters * have a converter chip that supports CEC-Tunneling-over-AUX (usually the * Parade PS176), but they do not wire up the CEC pin, thus making CEC - * useless. + * useless. Note that MegaChips 2900-based adapters appear to have good + * support for CEC tunneling. Those adapters that I have tested using + * this chipset all have the CEC line connected. * * Sadly there is no way for this driver to know this. What happens is * that a /dev/cecX device is created that is isolated and unable to see