This patch allows LVDS PHYs to be configured through the generic functions and through a custom structure added to the generic union.
The parameters added here are based on common LVDS PHY implementation practices. The set of parameters should cover all potential users.
Cc: Kishon Vijay Abraham I kishon@ti.com Cc: Vinod Koul vkoul@kernel.org Cc: NXP Linux Team linux-imx@nxp.com Reviewed-by: Robert Foss robert.foss@linaro.org Signed-off-by: Liu Ying victor.liu@nxp.com --- v3->v4: * Add Robert's R-b tag.
v2->v3: * No change.
v1->v2: * No change.
include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/phy/phy.h | 4 ++++ 2 files changed, 52 insertions(+) create mode 100644 include/linux/phy/phy-lvds.h
diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h new file mode 100644 index 00000000..1b5b9d6 --- /dev/null +++ b/include/linux/phy/phy-lvds.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2020 NXP + */ + +#ifndef __PHY_LVDS_H_ +#define __PHY_LVDS_H_ + +/** + * struct phy_configure_opts_lvds - LVDS configuration set + * + * This structure is used to represent the configuration state of a + * LVDS phy. + */ +struct phy_configure_opts_lvds { + /** + * @bits_per_lane_and_dclk_cycle: + * + * Number of bits per data lane and differential clock cycle. + */ + unsigned int bits_per_lane_and_dclk_cycle; + + /** + * @differential_clk_rate: + * + * Clock rate, in Hertz, of the LVDS differential clock. + */ + unsigned long differential_clk_rate; + + /** + * @lanes: + * + * Number of active, consecutive, data lanes, starting from + * lane 0, used for the transmissions. + */ + unsigned int lanes; + + /** + * @is_slave: + * + * Boolean, true if the phy is a slave which works together + * with a master phy to support dual link transmission, + * otherwise a regular phy or a master phy. + */ + bool is_slave; +}; + +#endif /* __PHY_LVDS_H_ */ diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index e435bdb..d450b44 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -17,6 +17,7 @@ #include <linux/regulator/consumer.h>
#include <linux/phy/phy-dp.h> +#include <linux/phy/phy-lvds.h> #include <linux/phy/phy-mipi-dphy.h>
struct phy; @@ -51,10 +52,13 @@ enum phy_mode { * the MIPI_DPHY phy mode. * @dp: Configuration set applicable for phys supporting * the DisplayPort protocol. + * @lvds: Configuration set applicable for phys supporting + * the LVDS phy mode. */ union phy_configure_opts { struct phy_configure_opts_mipi_dphy mipi_dphy; struct phy_configure_opts_dp dp; + struct phy_configure_opts_lvds lvds; };
/**