Getting rotation info is cheap so we can do it on demand.
This is done in preparation for the removal of struct drm_fb_helper_crtc.
Cc: Hans de Goede hdegoede@redhat.com Signed-off-by: Noralf Trønnes noralf@tronnes.org --- drivers/gpu/drm/drm_fb_helper.c | 131 ++++++++++++++++++++-------------------- include/drm/drm_fb_helper.h | 8 --- 2 files changed, 65 insertions(+), 74 deletions(-)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 0646b108030b..e48ace2d55f5 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -361,6 +361,48 @@ int drm_fb_helper_debug_leave(struct fb_info *info) } EXPORT_SYMBOL(drm_fb_helper_debug_leave);
+/* Check if the plane can hw rotate to match panel orientation */ +static bool drm_fb_helper_panel_rotation(struct drm_connector *connector, + struct drm_plane *plane, + unsigned int *rotation) +{ + uint64_t valid_mask = 0; + unsigned int i; + + if (!connector) + return false; + + switch (connector->display_info.panel_orientation) { + case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: + *rotation = DRM_MODE_ROTATE_180; + break; + case DRM_MODE_PANEL_ORIENTATION_LEFT_UP: + *rotation = DRM_MODE_ROTATE_90; + break; + case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: + *rotation = DRM_MODE_ROTATE_270; + break; + default: + *rotation = DRM_MODE_ROTATE_0; + } + + /* + * TODO: support 90 / 270 degree hardware rotation, + * depending on the hardware this may require the framebuffer + * to be in a specific tiling format. + */ + if (*rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) + return false; + + for (i = 0; i < plane->rotation_property->num_values; i++) + valid_mask |= (1ULL << plane->rotation_property->values[i]); + + if (!(*rotation & valid_mask)) + return false; + + return true; +} + static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active) { struct drm_device *dev = fb_helper->dev; @@ -406,10 +448,13 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ for (i = 0; i < fb_helper->crtc_count; i++) { struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set; struct drm_plane *primary = mode_set->crtc->primary; + unsigned int rotation;
- /* Cannot fail as we've already gotten the plane state above */ - plane_state = drm_atomic_get_new_plane_state(state, primary); - plane_state->rotation = fb_helper->crtc_info[i].rotation; + if (drm_fb_helper_panel_rotation(mode_set->connectors[0], primary, &rotation)) { + /* Cannot fail as we've already gotten the plane state above */ + plane_state = drm_atomic_get_new_plane_state(state, primary); + plane_state->rotation = rotation; + }
ret = __drm_atomic_helper_set_config(mode_set, state); if (ret != 0) @@ -841,7 +886,6 @@ int drm_fb_helper_init(struct drm_device *dev, if (!fb_helper->crtc_info[i].mode_set.connectors) goto out_free; fb_helper->crtc_info[i].mode_set.num_connectors = 0; - fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0; }
i = 0; @@ -2414,62 +2458,6 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper, return best_score; }
-/* - * This function checks if rotation is necessary because of panel orientation - * and if it is, if it is supported. - * If rotation is necessary and supported, its gets set in fb_crtc.rotation. - * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets - * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only - * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do - * the unsupported rotation. - */ -static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper, - struct drm_fb_helper_crtc *fb_crtc, - struct drm_connector *connector) -{ - struct drm_plane *plane = fb_crtc->mode_set.crtc->primary; - uint64_t valid_mask = 0; - int i, rotation; - - fb_crtc->rotation = DRM_MODE_ROTATE_0; - - switch (connector->display_info.panel_orientation) { - case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: - rotation = DRM_MODE_ROTATE_180; - break; - case DRM_MODE_PANEL_ORIENTATION_LEFT_UP: - rotation = DRM_MODE_ROTATE_90; - break; - case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: - rotation = DRM_MODE_ROTATE_270; - break; - default: - rotation = DRM_MODE_ROTATE_0; - } - - /* - * TODO: support 90 / 270 degree hardware rotation, - * depending on the hardware this may require the framebuffer - * to be in a specific tiling format. - */ - if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) { - fb_helper->sw_rotations |= rotation; - return; - } - - for (i = 0; i < plane->rotation_property->num_values; i++) - valid_mask |= (1ULL << plane->rotation_property->values[i]); - - if (!(rotation & valid_mask)) { - fb_helper->sw_rotations |= rotation; - return; - } - - fb_crtc->rotation = rotation; - /* Rotating in hardware, fbcon should not rotate */ - fb_helper->sw_rotations |= DRM_MODE_ROTATE_0; -} - static void drm_setup_crtcs(struct drm_fb_helper *fb_helper, u32 width, u32 height) { @@ -2529,7 +2517,6 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper, drm_fb_helper_modeset_release(fb_helper, &fb_helper->crtc_info[i].mode_set);
- fb_helper->sw_rotations = 0; drm_fb_helper_for_each_connector(fb_helper, i) { struct drm_display_mode *mode = modes[i]; struct drm_fb_helper_crtc *fb_crtc = crtcs[i]; @@ -2549,7 +2536,6 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper, modeset->mode = drm_mode_duplicate(dev, fb_crtc->desired_mode); drm_connector_get(connector); - drm_setup_crtc_rotation(fb_helper, fb_crtc, connector); modeset->connectors[modeset->num_connectors++] = connector; modeset->x = offset->x; modeset->y = offset->y; @@ -2572,11 +2558,24 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper, static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper) { struct fb_info *info = fb_helper->fbdev; + unsigned int rotation, sw_rotations = 0; int i;
- for (i = 0; i < fb_helper->crtc_count; i++) - if (fb_helper->crtc_info[i].mode_set.num_connectors) - fb_helper->crtc_info[i].mode_set.fb = fb_helper->fb; + for (i = 0; i < fb_helper->crtc_count; i++) { + struct drm_mode_set *modeset = &fb_helper->crtc_info[i].mode_set; + + if (!modeset->num_connectors) + continue; + + modeset->fb = fb_helper->fb; + + if (drm_fb_helper_panel_rotation(modeset->connectors[0], + modeset->crtc->primary, &rotation)) + /* Rotating in hardware, fbcon should not rotate */ + sw_rotations |= DRM_MODE_ROTATE_0; + else + sw_rotations |= rotation; + }
mutex_lock(&fb_helper->dev->mode_config.mutex); drm_fb_helper_for_each_connector(fb_helper, i) { @@ -2592,7 +2591,7 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper) } mutex_unlock(&fb_helper->dev->mode_config.mutex);
- switch (fb_helper->sw_rotations) { + switch (sw_rotations) { case DRM_MODE_ROTATE_0: info->fbcon_rotate_hint = FB_ROTATE_UR; break; diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index b069433e7fc1..d1e45c832cd5 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -49,7 +49,6 @@ struct drm_fb_helper_crtc { struct drm_mode_set mode_set; struct drm_display_mode *desired_mode; int x, y; - int rotation; };
/** @@ -160,13 +159,6 @@ struct drm_fb_helper { struct drm_fb_helper_crtc *crtc_info; int connector_count; int connector_info_alloc_count; - /** - * @sw_rotations: - * Bitmask of all rotations requested for panel-orientation which - * could not be handled in hardware. If only one bit is set - * fbdev->fbcon_rotate_hint gets set to the requested rotation. - */ - int sw_rotations; /** * @connector_info: *