- fix setting output_port = 1 (issue found by paul@crapouillou.net) - ci20.dts: convert to use hdmi-connector (by hns@goldelico.com) - add a hdmi-regulator to control +5V power (by hns@goldelico.com) - added a fix to dw-hdmi to call drm_kms_helper_hotplug_event on plugin event detection (by hns@goldelico.com) - always allocate extended descriptor but initialize only for jz4780 (by hns@goldelico.com) - updated to work on top of "[PATCH v3 0/6] drm/ingenic: Various improvements v3" (by paul@crapouillou.net) - rebased to v5.13-rc3
PATCH V3 2021-08-08 07:10:50: This series adds HDMI support for JZ4780 and CI20 board (and fixes one IPU related issue in registration error path) - [patch 1/8] switched from mode_fixup to atomic_check (suggested by robert.foss@linaro.org) - the call to the dw-hdmi specialization is still called mode_fixup - [patch 3/8] diverse fixes for ingenic-drm-drv (suggested by paul@crapouillou.net) - factor out some non-HDMI features of the jz4780 into a separate patch - multiple fixes around max height - do not change regmap config but a copy on stack - define some constants - factor out fixing of drm_init error path for IPU into separate patch - use FIELD_PREP() - [patch 8/8] conversion to component framework dropped (suggested by Laurent.pinchart@ideasonboard.com and paul@crapouillou.net)
PATCH V2 2021-08-05 16:08:05: This series adds HDMI support for JZ4780 and CI20 board
V2: - code and commit messages revisited for checkpatch warnings - rebased on v5.14-rc4 - include (failed, hence RFC 8/8) attempt to convert to component framework (was suggested by Paul Cercueil paul@crapouillou.net a while ago)
H. Nikolaus Schaller (2): drm/bridge: synopsis: Fix to properly handle HPD MIPS: defconfig: CI20: configure for DRM_DW_HDMI_JZ4780
Paul Boddie (7): drm/ingenic: Fix drm_init error path if IPU was registered drm/ingenic: Add support for JZ4780 and HDMI output drm/bridge: synopsis: Add mode_fixup and bridge timings support drm/ingenic: Add dw-hdmi driver for jz4780 MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD controllers MIPS: DTS: CI20: Add DT nodes for HDMI setup drm/ingenic: add some jz4780 specific features
Sam Ravnborg (1): dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema
.../bindings/display/ingenic-jz4780-hdmi.yaml | 85 +++++++++++ arch/mips/boot/dts/ingenic/ci20.dts | 67 +++++++++ arch/mips/boot/dts/ingenic/jz4780.dtsi | 45 ++++++ arch/mips/configs/ci20_defconfig | 6 + drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 9 ++ drivers/gpu/drm/ingenic/Kconfig | 9 ++ drivers/gpu/drm/ingenic/Makefile | 1 + drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 135 ++++++++++++++++- drivers/gpu/drm/ingenic/ingenic-drm.h | 42 ++++++ drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c | 142 ++++++++++++++++++ include/drm/bridge/dw_hdmi.h | 5 + 11 files changed, 540 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml create mode 100644 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c