Re: [PATCH v2 2/3] dt-bindings: display/bridge: Add binding for NWL mipi dsi host controller

Hi Laurent, thanks for having a look!

On Wed, Aug 21, 2019 at 09:15:18PM +0300, Laurent Pinchart wrote:

Hi Guido,

Thank you for the patch.

On Fri, Aug 09, 2019 at 06:24:22PM +0200, Guido Günther wrote:

...

The Northwest Logic MIPI DSI IP core can be found in NXPs i.MX8 SoCs.

Signed-off-by: Guido Günther agx@sigxcpu.org

.../bindings/display/bridge/nwl-dsi.yaml | 155 ++++++++++++++++++ 1 file changed, 155 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml new file mode 100644 index 000000000000..5ed8bc4a4d18 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/imx-nwl-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#

+title: Northwest Logic MIPI-DSI on imx SoCs

+maintainers:

• • Guido Gúnther agx@sigxcpu.org
• • Robert Chiras robert.chiras@nxp.com

+description: |

• NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
• the SOCs NWL MIPI-DSI host controller.

+properties:

• compatible:
• oneOf:

•  - items:
  

•    - const: fsl,imx8mq-nwl-dsi
  

• reg:
• maxItems: 1
• interrupts:
• maxItems: 1
• clocks:
• items:

•  - description: DSI core clock
  

•  - description: RX_ESC clock (used in escape mode)
  

•  - description: TX_ESC clock (used in escape mode)
  

•  - description: PHY_REF clock
  

• clock-names:
• items:

•  - const: core
  

•  - const: rx_esc
  

•  - const: tx_esc
  

•  - const: phy_ref
  

• phys:
• maxItems: 1
• description:

•  A phandle to the phy module representing the DPHY
  

• phy-names:
• items:

•  - const: dphy
  

• power-domains:
• maxItems: 1
• description:

•  A phandle to the power domain
  

• resets:
• maxItems: 4
• description:

•  A phandle to the reset controller
  

• reset-names:
• items:

•  - const: byte
  

•  - const: dpi
  

•  - const: esc
  

•  - const: pclk
  

• mux-sel:
• maxItems: 1
• description:

•  A phandle to the MUX register set
  

Did you mean the MUX syscon ? A phandle to a register set sounds a bit strange.

That one is gone in v3 in favour of mux-controls.

...

• port:
• type: object
• description:

•  A input put or output port node.
  

s/input put/input/

Thanks! I've shuffled this around in v3 and added some more detail. Cheers, -- Guido

...

• ports:
• type: object
• description:

•  A node containing DSI input & output port nodes with endpoint
  

•  definitions as documented in
  

•  Documentation/devicetree/bindings/graph.txt.
  

+patternProperties:

• "^panel@[0-9]+$": true

+allOf:

• • if:

•  properties:
  

•    compatible:
  

•      contains:
  

•        enum:
  

•          - fsl,imx8mq-nwl-dsi
  

• then:

•  required:
  

•    - resets
  

•    - reset-names
  

•    - mux-sel
  

+required:

• • compatible
• • reg
• • interrupts
• • clocks
• • clock-names
• • phys
• • phy-names

+examples:

• • |
• mipi_dsi: mipi_dsi@30a00000 {

•          #address-cells = <1>;
  

•          #size-cells = <0>;
  

•          compatible = "fsl,imx8mq-nwl-dsi";
  

•          reg = <0x30A00000 0x300>;
  

•          clocks = <&clk 163>, <&clk 244>, <&clk 245>, <&clk 164>;
  

•          clock-names = "core", "rx_esc", "tx_esc", "phy_ref";
  

•          interrupts = <0 34 4>;
  

•          power-domains = <&pgc_mipi>;
  

•          resets = <&src 0>, <&src 1>, <&src 2>, <&src 3>;
  

•          reset-names = "byte", "dpi", "esc", "pclk";
  

•          mux-sel = <&iomuxc_gpr>;
  

•          phys = <&dphy>;
  

•          phy-names = "dphy";
  

•          panel@0 {
  

•                  compatible = "...";
  

•                  port@0 {
  

•                       panel_in: endpoint {
  

•                                 remote-endpoint = <&mipi_dsi_out>;
  

•                       };
  

•                  };
  

•          };
  

•          ports {
  

•                #address-cells = <1>;
  

•                #size-cells = <0>;
  

•                port@0 {
  

•                       reg = <0>;
  

•                       mipi_dsi_in: endpoint {
  

•                                    remote-endpoint = <&lcdif_mipi_dsi>;
  

•                       };
  

•                };
  

•                port@1 {
  

•                       reg = <1>;
  

•                       mipi_dsi_out: endpoint {
  

•                                     remote-endpoint = <&panel_in>;
  

•                       };
  

•                };
  

•          };
  

•  };
  

-- Regards,

Laurent Pinchart