Convert mediatek,musb.txt to YAML schema mediatek,musb.yaml
Cc: Min Guo min.guo@mediatek.com Signed-off-by: Chunfeng Yun chunfeng.yun@mediatek.com Reviewed-by: Rob Herring robh@kernel.org --- v3: add Reviewed-by Rob v2: new patch --- .../devicetree/bindings/usb/mediatek,musb.txt | 57 --------- .../bindings/usb/mediatek,musb.yaml | 113 ++++++++++++++++++ 2 files changed, 113 insertions(+), 57 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.yaml
diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt deleted file mode 100644 index 5eedb0296562..000000000000 --- a/Documentation/devicetree/bindings/usb/mediatek,musb.txt +++ /dev/null @@ -1,57 +0,0 @@ -MediaTek musb DRD/OTG controller -------------------------------------------- - -Required properties: - - compatible : should be one of: - "mediatek,mt2701-musb" - ... - followed by "mediatek,mtk-musb" - - reg : specifies physical base address and size of - the registers - - interrupts : interrupt used by musb controller - - interrupt-names : must be "mc" - - phys : PHY specifier for the OTG phy - - dr_mode : should be one of "host", "peripheral" or "otg", - refer to usb/generic.txt - - clocks : a list of phandle + clock-specifier pairs, one for - each entry in clock-names - - clock-names : must contain "main", "mcu", "univpll" - for clocks of controller - -Optional properties: - - power-domains : a phandle to USB power domain node to control USB's - MTCMOS - -Required child nodes: - usb connector node as defined in bindings/connector/usb-connector.yaml -Optional properties: - - id-gpios : input GPIO for USB ID pin. - - vbus-gpios : input GPIO for USB VBUS pin. - - vbus-supply : reference to the VBUS regulator, needed when supports - dual-role mode - - usb-role-switch : use USB Role Switch to support dual-role switch, see - usb/generic.txt. - -Example: - -usb2: usb@11200000 { - compatible = "mediatek,mt2701-musb", - "mediatek,mtk-musb"; - reg = <0 0x11200000 0 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "mc"; - phys = <&u2port2 PHY_TYPE_USB2>; - dr_mode = "otg"; - clocks = <&pericfg CLK_PERI_USB0>, - <&pericfg CLK_PERI_USB0_MCU>, - <&pericfg CLK_PERI_USB_SLV>; - clock-names = "main","mcu","univpll"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; - usb-role-switch; - connector{ - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; - vbus-supply = <&usb_vbus>; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.yaml b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml new file mode 100644 index 000000000000..3e60df4b91bb --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/mediatek,musb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MUSB DRD/OTG Controller Device Tree Bindings + +maintainers: + - Min Guo min.guo@mediatek.com + +properties: + $nodename: + pattern: '^usb@[0-9a-f]+$' + + compatible: + items: + - enum: + - mediatek,mt2701-musb + - const: mediatek,mtk-musb + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: mc + + clocks: + items: + - description: The main/core clock + - description: The system bus clock + - description: The 48Mhz clock + + clock-names: + items: + - const: main + - const: mcu + - const: univpll + + phys: + maxItems: 1 + + usb-role-switch: + $ref: /schemas/types.yaml#/definitions/flag + description: Support role switch. See usb/generic.txt + type: boolean + + dr_mode: + enum: + - host + - otg + - peripheral + + power-domains: + description: A phandle to USB power domain node to control USB's MTCMOS + maxItems: 1 + + connector: + $ref: /connector/usb-connector.yaml# + description: Connector for dual role switch + type: object + +dependencies: + usb-role-switch: [ 'connector' ] + connector: [ 'usb-role-switch' ] + +required: + - compatible + - reg + - interrupts + - interrupt-names + - phys + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mt2701-power.h> + + usb@11200000 { + compatible = "mediatek,mt2701-musb", "mediatek,mtk-musb"; + reg = <0x11200000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + usb-role-switch; + + connector{ + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_vbus>; + }; + }; +...