Hi,
Sorry, I send more than 10 patches.
I will remove this dummy patches tomorrow with next version.
On 03/13/2018 03:12 PM, Patrice CHOTARD wrote:
Hi Yannick
There is a problem with patch 4. I received two patches 04/10, this one and [PATCH v3 04/10] video: add support of panel OTM8009A.
Patrice
On 03/13/2018 02:50 PM, yannick fertre wrote:
drivers/video/orisetech_otm8009a.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/video/orisetech_otm8009a.c b/drivers/video/orisetech_otm8009a.c index 81b11d7..aa8139a 100644 --- a/drivers/video/orisetech_otm8009a.c +++ b/drivers/video/orisetech_otm8009a.c @@ -289,9 +289,11 @@ static int otm8009a_panel_probe(struct udevice *dev) struct otm8009a_panel_priv *priv = dev_get_priv(dev); int ret;
- /* reset panel must be done before probe */
/* reset panel */ dm_gpio_set_value(&priv->reset, true);
mdelay(1);
if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) { dev_err(dev, "enable regulator '%s'\n", priv->reg->name); ret = regulator_set_enable(priv->reg, true);