While looking through dts changes for sc7280 eDP I found that none of the regulators that were being defined were listed in the bindings. That being said, the current Linux drivers _were_ looking for regulators. This series tries to document the reality to the best of my ability.
If someone from Qualcomm has better documentation than I do and wants to correct anything here then I'd be more than happy. For the PHY patch especially I don't have a great way to map what I see in datasheets / schematics to figure out which is the supply for the "phy" and the "pll".
Assuming these look OK, I'd expect the PHY patch to land through the PHY tree and the display patch to land through msm-next. I can split the series up if need be--the two patches are just in one series because they have a similar topic--there are no actual dependencies here.
Douglas Anderson (2): dt-bindings: msm/dp: List supplies in the bindings dt-bindings: phy: List supplies for qcom,edp-phy
.../devicetree/bindings/display/msm/dp-controller.yaml | 6 ++++++ Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml | 6 ++++++ 2 files changed, 12 insertions(+)