Some boards have an entirely passive RGB to VGA bridge, based on either DACs or resistor ladders.
Those might or might not have an i2c bus routed to the VGA connector in order to access the screen EDIDs.
Add a bridge that doesn't do anything but expose the modes available on the screen, either based on the EDIDs if available, or based on the XGA standards.
Signed-off-by: Maxime Ripard maxime.ripard@free-electrons.com --- .../bindings/display/bridge/dumb-vga.txt | 40 +++++ drivers/gpu/drm/bridge/Kconfig | 6 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/dumb-vga.c | 186 +++++++++++++++++++++ 4 files changed, 233 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/dumb-vga.txt create mode 100644 drivers/gpu/drm/bridge/dumb-vga.c
diff --git a/Documentation/devicetree/bindings/display/bridge/dumb-vga.txt b/Documentation/devicetree/bindings/display/bridge/dumb-vga.txt new file mode 100644 index 000000000000..757f04de97f3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga.txt @@ -0,0 +1,40 @@ +Passive RGB to VGA bridge +------------------------- + +This binding is aimed for entirely passive RGB to VGA bridges that do not +require any configuration. + +Required properties: + +- compatible: Should be "dumb-vga-bridge" + +Optional properties: + +- ddc-i2c-bus: phandle to the i2c bus used to communicate with the monitor + +Required nodes: + +This device has one video port. Its connection is modelled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. This +connection is meant to be the RGB input bus. + + +Example +------- + +bridge { + compatible = "dumb-vga-bridge"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + vga_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_vga>; + }; + }; +}; diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 8f7423f18da5..cf279956cbec 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -17,6 +17,12 @@ config DRM_ANALOGIX_ANX78XX the HDMI output of an application processor to MyDP or DisplayPort.
+config DRM_DUMB_VGA + tristate "Dumb RGB to VGA Bridge support" + select DRM_KMS_HELPER + help + Support for passive RGB to VGA bridges + config DRM_DW_HDMI tristate select DRM_KMS_HELPER diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 96b13b30e6ab..63f21120e8f8 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -1,6 +1,7 @@ ccflags-y := -Iinclude/drm
obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o +obj-$(CONFIG_DRM_DUMB_VGA) += dumb-vga.o obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o diff --git a/drivers/gpu/drm/bridge/dumb-vga.c b/drivers/gpu/drm/bridge/dumb-vga.c new file mode 100644 index 000000000000..2864fa535bf8 --- /dev/null +++ b/drivers/gpu/drm/bridge/dumb-vga.c @@ -0,0 +1,186 @@ + +#include <linux/module.h> + +#include <drm/drmP.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> + +struct dumb_vga { + struct drm_bridge bridge; + struct drm_connector connector; + + struct i2c_adapter *ddc; +}; + +static inline struct dumb_vga * +drm_bridge_to_dumb_vga(struct drm_bridge *bridge) +{ + return container_of(bridge, struct dumb_vga, bridge); +} + +static inline struct dumb_vga * +drm_connector_to_dumb_vga(struct drm_connector *connector) +{ + return container_of(connector, struct dumb_vga, connector); +} + +static int dumb_vga_get_modes(struct drm_connector *connector) +{ + struct dumb_vga *vga = drm_connector_to_dumb_vga(connector); + struct edid *edid; + int ret; + + if (!vga->ddc) + goto fallback; + + edid = drm_get_edid(connector, vga->ddc); + if (!edid) { + DRM_INFO("EDID readout failed, falling back to standard modes\n"); + goto fallback; + } + + drm_mode_connector_update_edid_property(connector, edid); + return drm_add_edid_modes(connector, edid); + +fallback: + /* + * In case we cannot retrieve the EDIDs (broken or missing i2c + * bus), fallback on the XGA standards + */ + ret = drm_add_modes_noedid(connector, 1920, 1200); + + /* And prefer a mode pretty much anyone can handle */ + drm_set_preferred_mode(connector, 1024, 768); + + return ret; +} + +static struct drm_encoder * +dumb_vga_best_encoder(struct drm_connector *connector) +{ + struct dumb_vga *vga = drm_connector_to_dumb_vga(connector); + + return vga->bridge.encoder; +} + +static struct drm_connector_helper_funcs dumb_vga_con_helper_funcs = { + .get_modes = dumb_vga_get_modes, + .best_encoder = dumb_vga_best_encoder, +}; + +static enum drm_connector_status +dumb_vga_connector_detect(struct drm_connector *connector, bool force) +{ + return connector_status_connected; +} + +static void +dumb_vga_connector_destroy(struct drm_connector *connector) +{ + drm_connector_cleanup(connector); +} + +static struct drm_connector_funcs dumb_vga_con_funcs = { + .dpms = drm_atomic_helper_connector_dpms, + .detect = dumb_vga_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = dumb_vga_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int dumb_vga_attach(struct drm_bridge *bridge) +{ + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge); + int ret; + + if (!bridge->encoder) { + DRM_ERROR("Missing encoder\n"); + return -ENODEV; + } + + drm_connector_helper_add(&vga->connector, + &dumb_vga_con_helper_funcs); + ret = drm_connector_init(bridge->dev, &vga->connector, + &dumb_vga_con_funcs, DRM_MODE_CONNECTOR_VGA); + if (ret) { + DRM_ERROR("Failed to initialize connector\n"); + return ret; + } + + drm_mode_connector_attach_encoder(&vga->connector, + bridge->encoder); + + return 0; +} + +static void dumb_vga_nop(struct drm_bridge *bridge) {}; + +static struct drm_bridge_funcs dumb_vga_bridge_funcs = { + .attach = dumb_vga_attach, + .enable = dumb_vga_nop, + .disable = dumb_vga_nop, + .pre_enable = dumb_vga_nop, + .post_disable = dumb_vga_nop, +}; + +static int dumb_vga_probe(struct platform_device *pdev) +{ + struct dumb_vga *vga; + struct device_node *ddc; + + vga = devm_kzalloc(&pdev->dev, sizeof(*vga), GFP_KERNEL); + if (!vga) + return -ENOMEM; + platform_set_drvdata(pdev, vga); + + ddc = of_parse_phandle(pdev->dev.of_node, "ddc-i2c-bus", 0); + if (ddc) { + vga->ddc = of_find_i2c_adapter_by_node(ddc); + of_node_put(ddc); + + if (!vga->ddc) { + dev_err(&pdev->dev, "Couldn't retrieve i2c bus\n"); + return -EPROBE_DEFER; + } + } else { + dev_info(&pdev->dev, + "No i2c bus specified... Disabling EDID readout\n"); + } + + vga->bridge.funcs = &dumb_vga_bridge_funcs; + vga->bridge.of_node = pdev->dev.of_node; + + return drm_bridge_add(&vga->bridge); +} + +static int dumb_vga_remove(struct platform_device *pdev) +{ + struct dumb_vga *vga = platform_get_drvdata(pdev); + + drm_bridge_remove(&vga->bridge); + + return 0; +} + +static const struct of_device_id dumb_vga_match[] = { + { .compatible = "dumb-vga-bridge" }, + {}, +}; +MODULE_DEVICE_TABLE(of, dumb_vga_match); + +struct platform_driver dumb_vga_driver = { + .probe = dumb_vga_probe, + .remove = dumb_vga_remove, + .driver = { + .name = "dumb-vga-bridge", + .of_match_table = dumb_vga_match, + }, +}; +module_platform_driver(dumb_vga_driver); + +MODULE_AUTHOR("Maxime Ripard maxime.ripard@free-electrons.com"); +MODULE_DESCRIPTION("Dumb RGB to VGA bridge driver"); +MODULE_LICENSE("GPL");