On Mon, 2021-11-08 at 10:11 +0100, Matthias Schiffer wrote:
On Tue, 2021-10-05 at 16:10 +0200, Matthias Schiffer wrote:
The PIXCLK needs to be enabled in SCFG before accessing the DCU on LS1021A, or the access will hang.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com
Hi, what is the status of this patch? I found it "archived" in the dri- devel patchwork, should I be looking somewhere else?
ping
v2:
- rebase
- remove unnecessary argument of fsl_dcu_scfg_config_ls1021a()
drivers/gpu/drm/fsl-dcu/Kconfig | 1 + drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25 +++++++++++++++++++++++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++ 3 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl- dcu/Kconfig index d7dd8ba90e3a..9e5a35e7c00c 100644 --- a/drivers/gpu/drm/fsl-dcu/Kconfig +++ b/drivers/gpu/drm/fsl-dcu/Kconfig @@ -8,6 +8,7 @@ config DRM_FSL_DCU select DRM_PANEL select REGMAP_MMIO select VIDEOMODE_HELPERS
- select MFD_SYSCON if SOC_LS1021A help Choose this option if you have an Freescale DCU chipset. If M is selected the module will be called fsl-dcu-drm.
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index 660fe573db96..b6b1cb75fc41 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -50,6 +50,23 @@ static const struct regmap_config fsl_dcu_regmap_config = { .volatile_reg = fsl_dcu_drm_is_volatile_reg, };
+static int fsl_dcu_scfg_config_ls1021a(void) +{
- struct regmap *scfg;
- scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
- if (IS_ERR(scfg))
return PTR_ERR(scfg);- /*
* For simplicity, enable the PIXCLK unconditionally. It might* be possible to disable the clock in PM or on unload as afuture
* improvement.*/- return regmap_update_bits(scfg, SCFG_PIXCLKCR,
SCFG_PIXCLKCR_PXCEN,
SCFG_PIXCLKCR_PXCEN);+}
static void fsl_dcu_irq_reset(struct drm_device *dev) { struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; @@ -108,6 +125,14 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags) return ret; }
- if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
ret = fsl_dcu_scfg_config_ls1021a();if (ret < 0) {dev_err(dev->dev, "failed to enable pixclk\n");goto done_vblank;}- }
- ret = drm_vblank_init(dev, dev->mode_config.num_crtc); if (ret < 0) { dev_err(dev->dev, "failed to initialize vblank\n");
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h index e2049a0e8a92..566396013c04 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h @@ -160,6 +160,9 @@ #define FSL_DCU_ARGB4444 12 #define FSL_DCU_YUV422 14
+#define SCFG_PIXCLKCR 0x28 +#define SCFG_PIXCLKCR_PXCEN BIT(31)
#define VF610_LAYER_REG_NUM 9 #define LS1021A_LAYER_REG_NUM 10