On Wed, Oct 6, 2021 at 3:21 PM Rob Herring robh+dt@kernel.org wrote:
On Wed, Oct 6, 2021 at 2:47 AM Alexander Stein alexander.stein@ew.tq-group.com wrote:
Add a VCC regulator which needs to be enabled before the EN pin is released.
Signed-off-by: Alexander Stein alexander.stein@ew.tq-group.com
.../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index 07b20383cbca..149cff3233c2 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -32,6 +32,9 @@ properties: maxItems: 1 description: GPIO specifier for bridge_en pin (active high).
+ vcc-supply: + description: A 1.8V power supply (see regulator/regulator.yaml).
ports: $ref: /schemas/graph.yaml#/properties/ports
@@ -94,6 +97,7 @@ required: - compatible - reg - enable-gpios + - vcc-supply
You generally can't make added properties required unless all DT files already had this property. It breaks compatibility.
I agree, but AFAICS none of the in-kernel DT files uses this binding. I used 'grep -re "ti,sn65dsi8[34]" arch/*/boot/dts' to check. Only ti,sn65dsi86 is used on some qcom boards, but this is a completly different binding and driver.
Best regards, Alexander