Hi Andrzej
Thank you for comments.
On 04/22/2014 09:15 PM, Andrzej Hajda wrote:
Hi YoungJun,
On 04/21/2014 02:28 PM, YoungJun Cho wrote:
Some phy control registers are not kept after software reset. So this patch makes the clocks containing phy control to be set after software reset.
Signed-off-by: YoungJun Cho yj44.cho@samsung.com Acked-by: Inki Dae inki.dae@samsung.com Acked-by: Kyungmin Park kyungmin.park@samsung.com
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index 956e5f3..2cf1f0b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -946,10 +946,10 @@ static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
static int exynos_dsi_init(struct exynos_dsi *dsi) {
- exynos_dsi_enable_clock(dsi); exynos_dsi_reset(dsi); enable_irq(dsi->irq); exynos_dsi_wait_for_reset(dsi);
exynos_dsi_enable_clock(dsi); exynos_dsi_init_link(dsi);
return 0;
I have commented it in the previous version of the patchset. I repeat it again. This is a regression, on exynos4210-trats I have 'timeout waiting for reset' message after dpms off, on.
I'm really sorry for that. I misunderstood last time.
I think the original codes were correct, because the reset timeout would be occurred without clock activation.
I'll check and fix again. (By the way, why am I ok?)
I will comment your previous answer here to make the discussion easier:
As I mentioned in description, it came from phy control registers. Fortunately Exynos4 SoCs are safe, but the DSIM_PHYCTRL_REG, DSIM_PHYTIMING_REG, DSIM_PHYTIMING1_REG and DSIM_PHYTIMING2_REG are affected which are used in exynos_dsi_set_pll() for Exynos5 SoCs.
So this patch is required for Exynos5 SoCs.
In the moment this patch is applied exynos_dsi_set_pll do not touch phy registers you have mentioned. Your change would be more clear if it will be merged together with the patch adding PHYCTRL settings.
Anyway, solution is simple - please set PHY registers after reset and configure clocks before reset to avoid reset timeouts, is there any reason to not do it this way?
The only reason is that the PHY control is related with PLL control and that was in exynos_dsi_enable_clock() call path. So I just wanted to keep current sequence.
If there is no way to use previous one, I'll consider your approach.
Thank you. Best regards YJ
Regards Andrzej