Replace the enable, disable and config pwm_ops with an apply op, to support the new atomic PWM API.
Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Hans de Goede hdegoede@redhat.com --- Changes in v6: - Rebase on 5.9-rc1 - Use do_div when calculating level because pwm_state.period and .duty_cycle are now u64
Changes in v3: - Keep crc_pwm_calc_clk_div() helper to avoid needless churn --- drivers/pwm/pwm-crc.c | 89 ++++++++++++++++++++++++++----------------- 1 file changed, 54 insertions(+), 35 deletions(-)
diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c index b72008c9b072..27dc30882424 100644 --- a/drivers/pwm/pwm-crc.c +++ b/drivers/pwm/pwm-crc.c @@ -51,59 +51,78 @@ static int crc_pwm_calc_clk_div(int period_ns) return clk_div; }
-static int crc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm) +static int crc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) { - struct crystalcove_pwm *crc_pwm = to_crc_pwm(c); - int div = crc_pwm_calc_clk_div(pwm_get_period(pwm)); + struct crystalcove_pwm *crc_pwm = to_crc_pwm(chip); + struct device *dev = crc_pwm->chip.dev; + int err;
- regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, div | PWM_OUTPUT_ENABLE); - regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1); + if (state->period > PWM_MAX_PERIOD_NS) { + dev_err(dev, "un-supported period_ns\n"); + return -EINVAL; + }
- return 0; -} + if (state->polarity != PWM_POLARITY_NORMAL) + return -EOPNOTSUPP;
-static void crc_pwm_disable(struct pwm_chip *c, struct pwm_device *pwm) -{ - struct crystalcove_pwm *crc_pwm = to_crc_pwm(c); - int div = crc_pwm_calc_clk_div(pwm_get_period(pwm)); + if (pwm_is_enabled(pwm) && !state->enabled) { + err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0); + if (err) { + dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err); + return err; + } + }
- regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0); - regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, div); -} + if (pwm_get_duty_cycle(pwm) != state->duty_cycle || + pwm_get_period(pwm) != state->period) { + u64 level = state->duty_cycle * PWM_MAX_LEVEL;
-static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm, - int duty_ns, int period_ns) -{ - struct crystalcove_pwm *crc_pwm = to_crc_pwm(c); - struct device *dev = crc_pwm->chip.dev; - int level; + do_div(level, state->period);
- if (period_ns > PWM_MAX_PERIOD_NS) { - dev_err(dev, "un-supported period_ns\n"); - return -EINVAL; + err = regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level); + if (err) { + dev_err(dev, "Error writing PWM0_DUTY_CYCLE %d\n", err); + return err; + } }
- if (pwm_get_period(pwm) != period_ns) { - int clk_div = crc_pwm_calc_clk_div(period_ns); - + if (pwm_is_enabled(pwm) && state->enabled && + pwm_get_period(pwm) != state->period) { /* changing the clk divisor, clear PWM_OUTPUT_ENABLE first */ - regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, 0); + err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, 0); + if (err) { + dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err); + return err; + } + }
- regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, - clk_div | PWM_OUTPUT_ENABLE); + if (pwm_get_period(pwm) != state->period || + pwm_is_enabled(pwm) != state->enabled) { + int clk_div = crc_pwm_calc_clk_div(state->period); + int pwm_output_enable = state->enabled ? PWM_OUTPUT_ENABLE : 0; + + err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, + clk_div | pwm_output_enable); + if (err) { + dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err); + return err; + } }
- /* change the pwm duty cycle */ - level = duty_ns * PWM_MAX_LEVEL / period_ns; - regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level); + if (!pwm_is_enabled(pwm) && state->enabled) { + err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1); + if (err) { + dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err); + return err; + } + }
return 0; }
static const struct pwm_ops crc_pwm_ops = { - .config = crc_pwm_config, - .enable = crc_pwm_enable, - .disable = crc_pwm_disable, + .apply = crc_pwm_apply, };
static int crystalcove_pwm_probe(struct platform_device *pdev)