Add binding documentation for the MT8167 SoC. The SoC needs an additional clock compared to the already supported SoC: mipi26m.
Signed-off-by: Fabien Parent fparent@baylibre.com --- .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index f06f24d405a5..10ae6be7225e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -7,12 +7,13 @@ channel output.
Required properties: - compatible: "mediatek,<chip>-dsi" -- the supported chips are mt2701, mt7623, mt8173 and mt8183. +- the supported chips are mt2701, mt7623, mt8167, mt8173 and mt8183. - reg: Physical base address and length of the controller's registers - interrupts: The interrupt signal from the function block. - clocks: device clocks See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "engine", "digital", and "hs" +- clock-names: must contain "engine", "digital", "hs" + Can optionnally also contain "mipi26m" - phys: phandle link to the MIPI D-PHY controller. - phy-names: must contain "dphy" - port: Output port node with endpoint definitions as described in @@ -26,7 +27,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
Required properties: - compatible: "mediatek,<chip>-mipi-tx" -- the supported chips are mt2701, 7623, mt8173 and mt8183. +- the supported chips are mt2701, 7623, mt8167, mt8173 and mt8183. - reg: Physical base address and length of the controller's registers - clocks: PLL reference clock - clock-output-names: name of the output clock line to the DSI encoder