This patch adds the MALI's power-model to set the IPA model to be used for power management.
Signed-off-by: Caesar Wang wxt@rock-chips.com ---
Changes in v2: None
Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index a461e47..b616e6b 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -37,6 +37,18 @@ Optional properties: - operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt for details.
+- power_model : Sets power model parameters. Note that this model was designed for the Juno + platform, and may not be suitable for other platforms. A structure containing : + - compatible: Should be arm,mali-simple-power-model + - dynamic-coefficient: Coefficient, in pW/(Hz V^2), which is multiplied + by v^2*f to calculate the dynamic power consumption. + - static-coefficient: Coefficient, in uW/V^3, which is multiplied by + v^3 to calculate the static power consumption. + - ts: An array containing coefficients for the temperature scaling + factor. This is used to scale the static power by a factor of + tsf/1000000, where tsf = ts[3]*T^3 + ts[2]*T^2 + ts[1]*T + ts[0], + and T = temperature in degrees. + - thermal-zone: A string identifying the thermal zone used for the GPU
Example for a Mali-T760: