Add voltage supplies to DVFS-capable devices in order to enable system-wide voltage scaling and allow CORE/RTC regulators to go lower.
Signed-off-by: Dmitry Osipenko digetx@gmail.com --- arch/arm/boot/dts/tegra20-ventana.dts | 65 +++++++++++++++++++++++---- 1 file changed, 56 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index b158771ac0b7..d5d90605e649 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -23,7 +23,19 @@ memory@0 { };
host1x@50000000 { + core-supply = <&vdd_core>; + + gr2d@54140000 { + core-supply = <&vdd_core>; + }; + + gr3d@54180000 { + core-supply = <&vdd_core>; + }; + dc@54200000 { + core-supply = <&vdd_core>; + rgb { status = "okay";
@@ -31,11 +43,16 @@ rgb { }; };
+ dc@54240000 { + core-supply = <&vdd_core>; + }; + hdmi@54280000 { status = "okay";
vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; + core-supply = <&vdd_core>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) @@ -43,6 +60,10 @@ hdmi@54280000 { }; };
+ vde@6001a000 { + core-supply = <&vdd_core>; + }; + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -419,18 +440,28 @@ sys_reg: sys { regulator-always-on; };
- sm0 { + vdd_core: sm0 { regulator-name = "vdd_sm0,vdd_core"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&rtc_vdd &vdd_cpu>; + regulator-coupled-max-spread = <170000 550000>; regulator-always-on; + regulator-boot-on; + + nvidia,tegra-core-regulator; };
- sm1 { + vdd_cpu: sm1 { regulator-name = "vdd_sm1,vdd_cpu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&vdd_core &rtc_vdd>; + regulator-coupled-max-spread = <550000 550000>; regulator-always-on; + regulator-boot-on; + + nvidia,tegra-cpu-regulator; };
sm2_reg: sm2 { @@ -449,10 +480,16 @@ ldo1 { regulator-always-on; };
- ldo2 { + rtc_vdd: ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&vdd_core &vdd_cpu>; + regulator-coupled-max-spread = <170000 550000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-rtc-regulator; };
ldo3 { @@ -526,8 +563,13 @@ pmc@7000e400 { nvidia,sys-clock-req-active-high; };
+ memory-controller@7000f400 { + core-supply = <&vdd_core>; + }; + usb@c5000000 { status = "okay"; + core-supply = <&vdd_core>; };
usb-phy@c5000000 { @@ -538,6 +580,7 @@ usb@c5004000 { status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; + core-supply = <&vdd_core>; };
usb-phy@c5004000 { @@ -548,6 +591,7 @@ usb-phy@c5004000 {
usb@c5008000 { status = "okay"; + core-supply = <&vdd_core>; };
usb-phy@c5008000 { @@ -559,6 +603,7 @@ mmc@c8000000 { power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; + core-supply = <&vdd_core>; };
mmc@c8000400 { @@ -567,12 +612,14 @@ mmc@c8000400 { wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; + core-supply = <&vdd_core>; };
mmc@c8000600 { status = "okay"; bus-width = <8>; non-removable; + core-supply = <&vdd_core>; };
backlight: backlight {