Hi Tomi,
Am Freitag, den 28.02.2014, 14:20 +0200 schrieb Tomi Valkeinen:
Add DT binding documentation for DVI Connector.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Reviewed-by: Archit Taneja archit@ti.com
.../devicetree/bindings/video/dvi-connector.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/dvi-connector.txt
diff --git a/Documentation/devicetree/bindings/video/dvi-connector.txt b/Documentation/devicetree/bindings/video/dvi-connector.txt new file mode 100644 index 000000000000..6a0aff866c78 --- /dev/null +++ b/Documentation/devicetree/bindings/video/dvi-connector.txt @@ -0,0 +1,26 @@ +DVI Connector +==============
+Required properties: +- compatible: "dvi-connector"
+Optional properties: +- label: a symbolic name for the connector +- i2c-bus: phandle to the i2c bus that is connected to DVI DDC
For the i.MX bindings I had called this property 'ddc', but Documentation/devicetree/bindings/panel/simple-panel.txt already uses 'ddc-i2c-bus'. We should definitely standardize this.
+Required nodes: +- Video port for DVI input
+Example +-------
+dvi0: connector@0 {
- compatible = "dvi-connector";
- label = "dvi";
- i2c-bus = <&i2c3>;
- dvi_connector_in: endpoint {
remote-endpoint = <&tfp410_out>;- };
+};
regards Philipp