Hi Stephen,
Are you have more comments?
On 1/24/2022 3:17 PM, Kuogee Hsieh wrote:
Some of DP link compliant test expects to return fail-safe mode if prefer detailed timing mode can not be supported by mainlink's lane and rate after link training. Therefore add fail-safe mode into connector mode list as backup mode. This patch fixes test case 4.2.2.1.
Changes in v2: -- add Fixes text string
Fixes: 4b85d405cfe9 ( "drm/msm/dp: reduce link rate if failed at link training 1") Signed-off-by: Kuogee Hsieh quic_khsieh@quicinc.com
drivers/gpu/drm/msm/dp/dp_panel.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c index 71db10c..f141872 100644 --- a/drivers/gpu/drm/msm/dp/dp_panel.c +++ b/drivers/gpu/drm/msm/dp/dp_panel.c @@ -212,6 +212,11 @@ int dp_panel_read_sink_caps(struct dp_panel *dp_panel, if (drm_add_modes_noedid(connector, 640, 480)) drm_set_preferred_mode(connector, 640, 480); mutex_unlock(&connector->dev->mode_config.mutex);
} else {
/* always add fail-safe mode as backup mode */mutex_lock(&connector->dev->mode_config.mutex);drm_add_modes_noedid(connector, 640, 480);mutex_unlock(&connector->dev->mode_config.mutex);}
if (panel->aux_cfg_update_done) {