In order to make further refactoring easier, let's move the HVS channel setup / teardown to their own function.
Reviewed-by: Dave Stevenson dave.stevenson@raspberrypi.com Tested-by: Chanwoo Choi cw00.choi@samsung.com Tested-by: Hoegeun Kwon hoegeun.kwon@samsung.com Tested-by: Stefan Wahren stefan.wahren@i2se.com Signed-off-by: Maxime Ripard maxime@cerno.tech --- drivers/gpu/drm/vc4/vc4_hvs.c | 104 +++++++++++++++++++---------------- 1 file changed, 58 insertions(+), 46 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c index fa61cad3a53d..dde931233d4a 100644 --- a/drivers/gpu/drm/vc4/vc4_hvs.c +++ b/drivers/gpu/drm/vc4/vc4_hvs.c @@ -196,6 +196,62 @@ static void vc4_hvs_update_gamma_lut(struct drm_crtc *crtc) vc4_hvs_lut_load(crtc); }
+static int vc4_hvs_init_channel(struct vc4_dev *vc4, struct drm_crtc *crtc, + struct drm_display_mode *mode, bool oneshot) +{ + struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(crtc->state); + unsigned int chan = vc4_crtc_state->assigned_channel; + u32 dispctrl; + + /* Turn on the scaler, which will wait for vstart to start + * compositing. + * When feeding the transposer, we should operate in oneshot + * mode. + */ + dispctrl = SCALER_DISPCTRLX_ENABLE; + + if (!vc4->hvs->hvs5) + dispctrl |= VC4_SET_FIELD(mode->hdisplay, + SCALER_DISPCTRLX_WIDTH) | + VC4_SET_FIELD(mode->vdisplay, + SCALER_DISPCTRLX_HEIGHT) | + (oneshot ? SCALER_DISPCTRLX_ONESHOT : 0); + else + dispctrl |= VC4_SET_FIELD(mode->hdisplay, + SCALER5_DISPCTRLX_WIDTH) | + VC4_SET_FIELD(mode->vdisplay, + SCALER5_DISPCTRLX_HEIGHT) | + (oneshot ? SCALER5_DISPCTRLX_ONESHOT : 0); + + HVS_WRITE(SCALER_DISPCTRLX(chan), dispctrl); + + return 0; +} + +static void vc4_hvs_stop_channel(struct drm_device *dev, unsigned int chan) +{ + struct vc4_dev *vc4 = to_vc4_dev(dev); + + if (HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_ENABLE) + return; + + HVS_WRITE(SCALER_DISPCTRLX(chan), + HVS_READ(SCALER_DISPCTRLX(chan)) | SCALER_DISPCTRLX_RESET); + HVS_WRITE(SCALER_DISPCTRLX(chan), + HVS_READ(SCALER_DISPCTRLX(chan)) & ~SCALER_DISPCTRLX_ENABLE); + + /* Once we leave, the scaler should be disabled and its fifo empty. */ + WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_RESET); + + WARN_ON_ONCE(VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan)), + SCALER_DISPSTATX_MODE) != + SCALER_DISPSTATX_MODE_DISABLED); + + WARN_ON_ONCE((HVS_READ(SCALER_DISPSTATX(chan)) & + (SCALER_DISPSTATX_FULL | SCALER_DISPSTATX_EMPTY)) != + SCALER_DISPSTATX_EMPTY); +} + int vc4_hvs_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state) { @@ -268,63 +324,19 @@ void vc4_hvs_atomic_enable(struct drm_crtc *crtc, struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state); struct drm_display_mode *mode = &crtc->state->adjusted_mode; bool oneshot = vc4_state->feed_txp; - u32 dispctrl;
vc4_hvs_update_dlist(crtc); - - /* Turn on the scaler, which will wait for vstart to start - * compositing. - * When feeding the transposer, we should operate in oneshot - * mode. - */ - dispctrl = SCALER_DISPCTRLX_ENABLE; - - if (!vc4->hvs->hvs5) - dispctrl |= VC4_SET_FIELD(mode->hdisplay, - SCALER_DISPCTRLX_WIDTH) | - VC4_SET_FIELD(mode->vdisplay, - SCALER_DISPCTRLX_HEIGHT) | - (oneshot ? SCALER_DISPCTRLX_ONESHOT : 0); - else - dispctrl |= VC4_SET_FIELD(mode->hdisplay, - SCALER5_DISPCTRLX_WIDTH) | - VC4_SET_FIELD(mode->vdisplay, - SCALER5_DISPCTRLX_HEIGHT) | - (oneshot ? SCALER5_DISPCTRLX_ONESHOT : 0); - - HVS_WRITE(SCALER_DISPCTRLX(vc4_state->assigned_channel), dispctrl); + vc4_hvs_init_channel(vc4, crtc, mode, oneshot); }
void vc4_hvs_atomic_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { struct drm_device *dev = crtc->dev; - struct vc4_dev *vc4 = to_vc4_dev(dev); struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(old_state); unsigned int chan = vc4_state->assigned_channel;
- if (HVS_READ(SCALER_DISPCTRLX(chan)) & - SCALER_DISPCTRLX_ENABLE) { - HVS_WRITE(SCALER_DISPCTRLX(chan), - SCALER_DISPCTRLX_RESET); - - /* While the docs say that reset is self-clearing, it - * seems it doesn't actually. - */ - HVS_WRITE(SCALER_DISPCTRLX(chan), 0); - } - - /* Once we leave, the scaler should be disabled and its fifo empty. */ - - WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_RESET); - - WARN_ON_ONCE(VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan)), - SCALER_DISPSTATX_MODE) != - SCALER_DISPSTATX_MODE_DISABLED); - - WARN_ON_ONCE((HVS_READ(SCALER_DISPSTATX(chan)) & - (SCALER_DISPSTATX_FULL | SCALER_DISPSTATX_EMPTY)) != - SCALER_DISPSTATX_EMPTY); + vc4_hvs_stop_channel(dev, chan); }
void vc4_hvs_atomic_flush(struct drm_crtc *crtc,