2014/10/27 21:13 "Laurent Pinchart" laurent.pinchart@ideasonboard.com:
Hi Simon,
On Monday 27 October 2014 09:38:29 Simon Horman wrote:
On Wed, Sep 24, 2014 at 11:04:32PM +0300, Laurent Pinchart wrote:
Add DT nodes for the ADV7511 HDMI encoder and its HDMI output
connector
and configure the DISP pin group that drives the HDMI transmitter DE pin.
Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com
Acked-by: Simon Horman horms+renesas@verge.net.au
Please be careful of any conflicts that may arise if this patch doesn't go through my renesas tree.
I think it would be best if the patch went through your tree. There's no compile time or runtime dependency on the DU HDMI code, so as soon as the ADV7511 DT bindings get accepted I plan to ask you to merge this patch.
Sure, that sounds like a good plan.
arch/arm/boot/dts/r8a7791-koelsch.dts | 50
+++++++++++++++++++++++++++++-
1 file changed, 49 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 9051e01..b7d0c41 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -209,6 +209,17 @@ states = <3300000 1 1800000 0>; };
- hdmi-out {
compatible = "hdmi-connector";type = "a";port {hdmi_con: endpoint {remote-endpoint = <&adv7511_out>;};};- };
};
&du { @@ -217,6 +228,11 @@ status = "okay";
ports {
port@0 {endpoint {remote-endpoint = <&adv7511_in>;};}; port@1 { lvds_connector: endpoint { };@@ -235,7 +251,7 @@ };
du_pins: du {
renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
renesas,groups = "du_rgb666", "du_sync", "du_disp","du_clk_out_0"; renesas,function = "du"; };
@@ -439,6 +455,38 @@ }; };
- hdmi@39 {
compatible = "adi,adv7511w";reg = <0x39>;interrupt-parent = <&gpio3>;interrupts = <29 IRQ_TYPE_EDGE_FALLING>;adi,input-depth = <8>;adi,input-colorspace = "rgb";adi,input-clock = "1x";adi,input-style = <1>;adi,input-justification = "evenly";ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;adv7511_in: endpoint {remote-endpoint = <&du_out_rgb>;};};port@1 {reg = <1>;adv7511_out: endpoint {remote-endpoint = <&hdmi_con>;};};};- };
- eeprom@50 { compatible = "renesas,24c02"; reg = <0x50>;
-- Regards,
Laurent Pinchart