On Wed, Nov 18, 2015 at 03:57:47PM -0500, Akshay Bhat wrote:
Add support for Innolux CheMei 12" G121X1-L03 XGA LVDS display.
Datasheet: http://www.azdisplays.com/PDF/G121X1-L03.pdf Signed-off-by: Akshay Bhat akshay.bhat@timesys.com
Acked-by: Rob Herring robh@kernel.org
.../bindings/display/panel/innolux,g121x1-l03.txt | 7 +++++ drivers/gpu/drm/panel/panel-simple.c | 31 ++++++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt new file mode 100644 index 0000000..6497446 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt @@ -0,0 +1,7 @@ +Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
+Required properties: +- compatible: should be "innolux,g121x1-l03"
+This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index f97b73e..d1821f7 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -832,6 +832,34 @@ static const struct panel_desc innolux_g121i1_l01 = { }, };
+static const struct drm_display_mode innolux_g121x1_l03_mode = {
- .clock = 65000,
- .hdisplay = 1024,
- .hsync_start = 1024 + 0,
- .hsync_end = 1024 + 1,
- .htotal = 1024 + 0 + 1 + 320,
- .vdisplay = 768,
- .vsync_start = 768 + 38,
- .vsync_end = 768 + 38 + 1,
- .vtotal = 768 + 38 + 1 + 0,
- .vrefresh = 60,
+};
+static const struct panel_desc innolux_g121x1_l03 = {
- .modes = &innolux_g121x1_l03_mode,
- .num_modes = 1,
- .bpc = 6,
- .size = {
.width = 246,.height = 185,- },
- .delay = {
.enable = 200,.unprepare = 200,.disable = 400,- },
+};
static const struct drm_display_mode innolux_n116bge_mode = { .clock = 76420, .hdisplay = 1366, @@ -1158,6 +1186,9 @@ static const struct of_device_id platform_of_match[] = { .compatible ="innolux,g121i1-l01", .data = &innolux_g121i1_l01 }, {
.compatible = "innolux,g121x1-l03",.data = &innolux_g121x1_l03,- }, { .compatible = "innolux,n116bge", .data = &innolux_n116bge, }, {
-- 2.6.3