Re: [PATCH] drm/bridge/synopsys: dsi: use mipi_dsi_device to find panel or bridge

Hi Yannick,

Am Freitag, 20. Dezember 2019, 16:52:47 CET schrieb Yannick FERTRE:

Hello Heiko, I test with success your patch on a board stm32mp1 with a panel raydium rm68200. I need more time to test with a HDMI bridge like ad7533.

I guess this was too short before the holiday season, so just a soft reminder, that you wanted to check that on that mentioned hdmi bridge :-)

Thanks Heiko

On 12/17/19 11:41 PM, Heiko Stuebner wrote:

...

From: Heiko Stuebner heiko.stuebner@theobroma-systems.com

Right now the dsi driver uses drm_of_find_panel_or_bridge() to find a connected panel or bridge. But this requires an of-graph connection between the dsi-host and dsi-device, where normal bindings for regular panels just expect the dsi device to be a subnode of the actual dsi host not requiring ports.

drm_of_find_panel_or_bridge is used to find panel/bridge under the actual device-node of the dsi device, but as this happens in the dsi_host_attach callback we already have the dsi-device and its device-node available and therefore can just call the relevant panel+bridge functions ourself, making it work as well in setups without port-connections.

Tested on a Rockchip px30 single-dsi with panels form Leadtek and Xinpeng as well on Gru-Scarlet (rk3399) with dual-dsi (and thus port-connections to both dsi controllers) connected to the Innotek display variant.

changes in v2:

• rework commit message, rereading what I had written was just too cringe-worthy ;-)

Signed-off-by: Heiko Stuebner heiko.stuebner@theobroma-systems.com

drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c index 981d532cdd59..4b4961e7c680 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c @@ -26,6 +26,7 @@ #include <drm/drm_mipi_dsi.h> #include <drm/drm_modes.h> #include <drm/drm_of.h> +#include <drm/drm_panel.h> #include <drm/drm_print.h> #include <drm/drm_probe_helper.h>

@@ -310,16 +311,16 @@ static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host, dsi->format = device->format; dsi->mode_flags = device->mode_flags;

• ret = drm_of_find_panel_or_bridge(host->dev->of_node, 1, 0,

• 			  &panel, &bridge);
  

• if (ret)

• return ret;
  

• if (panel) {

• panel = of_drm_find_panel(device->dev.of_node);

• if (!IS_ERR(panel)) { bridge = drm_panel_bridge_add_typed(panel, DRM_MODE_CONNECTOR_DSI); if (IS_ERR(bridge)) return PTR_ERR(bridge);

• } else {

• bridge = of_drm_find_bridge(device->dev.of_node);
  

• if (!bridge)
  

• 	return -EPROBE_DEFER;
  

  }

  dsi->panel_bridge = bridge;

@@ -340,6 +341,7 @@ static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host, { struct dw_mipi_dsi *dsi = host_to_dsi(host); const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;

• struct drm_bridge *bridge; int ret;

  if (pdata->host_ops && pdata->host_ops->detach) {

@@ -348,7 +350,8 @@ static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host, return ret; }

• drm_of_panel_bridge_remove(host->dev->of_node, 1, 0);

• bridge = of_drm_find_bridge(device->dev.of_node);

• drm_panel_bridge_remove(bridge);

  drm_bridge_remove(&dsi->bridge);