Add a panel database to the driver instead of reading propertes from DT data. This is similar to panel-simple, and I believe it's more future safe way to handle the panels.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Reviewed-by: Sam Ravnborg sam@ravnborg.org Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com --- drivers/gpu/drm/panel/panel-dsi-cm.c | 104 +++++++++++++++++---------- 1 file changed, 66 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-dsi-cm.c b/drivers/gpu/drm/panel/panel-dsi-cm.c index f5240fd82459..c549329dc4b9 100644 --- a/drivers/gpu/drm/panel/panel-dsi-cm.c +++ b/drivers/gpu/drm/panel/panel-dsi-cm.c @@ -21,10 +21,7 @@ #include <drm/drm_modes.h> #include <drm/drm_panel.h>
-#include <video/display_timing.h> #include <video/mipi_display.h> -#include <video/of_display_timing.h> -#include <video/videomode.h>
#define DCS_GET_ID1 0xda #define DCS_GET_ID2 0xdb @@ -32,6 +29,18 @@
#define DCS_REGULATOR_SUPPLY_NUM 2
+static const struct of_device_id dsicm_of_match[]; + +struct dsic_panel_data { + u32 xres; + u32 yres; + u32 refresh; + u32 width_mm; + u32 height_mm; + u32 max_hs_rate; + u32 max_lp_rate; +}; + struct panel_drv_data { struct mipi_dsi_device *dsi; struct drm_panel panel; @@ -47,16 +56,14 @@ struct panel_drv_data { */ unsigned long hw_guard_wait; /* max guard time in jiffies */
- /* panel HW configuration from DT or platform data */ + const struct dsic_panel_data *panel_data; + struct gpio_desc *reset_gpio;
struct regulator_bulk_data supplies[DCS_REGULATOR_SUPPLY_NUM];
bool use_dsi_backlight;
- int width_mm; - int height_mm; - /* runtime variables */ bool enabled;
@@ -450,11 +457,8 @@ static int dsicm_get_modes(struct drm_panel *panel, return -ENOMEM; }
- drm_mode_set_name(mode); - mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; - - connector->display_info.width_mm = ddata->width_mm; - connector->display_info.height_mm = ddata->height_mm; + connector->display_info.width_mm = ddata->panel_data->width_mm; + connector->display_info.height_mm = ddata->panel_data->height_mm;
drm_mode_probed_add(connector, mode);
@@ -471,15 +475,10 @@ static const struct drm_panel_funcs dsicm_panel_funcs = {
static int dsicm_probe_of(struct mipi_dsi_device *dsi) { - struct device_node *node = dsi->dev.of_node; struct backlight_device *backlight; struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi); - struct display_timing timing; - struct videomode vm = { - .hactive = 864, - .vactive = 480, - }; int err; + struct drm_display_mode *mode = &ddata->mode;
ddata->reset_gpio = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(ddata->reset_gpio)) { @@ -488,23 +487,16 @@ static int dsicm_probe_of(struct mipi_dsi_device *dsi) return err; }
- err = of_get_display_timing(node, "panel-timing", &timing); - if (!err) { - videomode_from_timing(&timing, &vm); - } else { - dev_warn(&dsi->dev, - "failed to get video timing, using defaults\n"); - } - - if (!vm.pixelclock) - vm.pixelclock = vm.hactive * vm.vactive * 60; - drm_display_mode_from_videomode(&vm, &ddata->mode); - - ddata->width_mm = 0; - of_property_read_u32(node, "width-mm", &ddata->width_mm); - - ddata->height_mm = 0; - of_property_read_u32(node, "height-mm", &ddata->height_mm); + mode->hdisplay = mode->hsync_start = mode->hsync_end = mode->htotal = + ddata->panel_data->xres; + mode->vdisplay = mode->vsync_start = mode->vsync_end = mode->vtotal = + ddata->panel_data->yres; + mode->clock = ddata->panel_data->xres * ddata->panel_data->yres * + ddata->panel_data->refresh / 1000; + mode->width_mm = ddata->panel_data->width_mm; + mode->height_mm = ddata->panel_data->height_mm; + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_set_name(mode);
ddata->supplies[0].supply = "vpnl"; ddata->supplies[1].supply = "vddi"; @@ -542,6 +534,10 @@ static int dsicm_probe(struct mipi_dsi_device *dsi) mipi_dsi_set_drvdata(dsi, ddata); ddata->dsi = dsi;
+ ddata->panel_data = of_device_get_match_data(dev); + if (!ddata->panel_data) + return -ENODEV; + r = dsicm_probe_of(dsi); if (r) return r; @@ -578,8 +574,8 @@ static int dsicm_probe(struct mipi_dsi_device *dsi) dsi->format = MIPI_DSI_FMT_RGB888; dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_EOT_PACKET; - dsi->hs_rate = 300000000; - dsi->lp_rate = 10000000; + dsi->hs_rate = ddata->panel_data->max_hs_rate; + dsi->lp_rate = ddata->panel_data->max_lp_rate;
drm_panel_add(&ddata->panel);
@@ -617,8 +613,40 @@ static int dsicm_remove(struct mipi_dsi_device *dsi) return 0; }
+static const struct dsic_panel_data taal_data = { + .xres = 864, + .yres = 480, + .refresh = 60, + .width_mm = 0, + .height_mm = 0, + .max_hs_rate = 300000000, + .max_lp_rate = 10000000, +}; + +static const struct dsic_panel_data himalaya_data = { + .xres = 480, + .yres = 864, + .refresh = 60, + .width_mm = 49, + .height_mm = 88, + .max_hs_rate = 300000000, + .max_lp_rate = 10000000, +}; + +static const struct dsic_panel_data droid4_data = { + .xres = 540, + .yres = 960, + .refresh = 60, + .width_mm = 50, + .height_mm = 89, + .max_hs_rate = 300000000, + .max_lp_rate = 10000000, +}; + static const struct of_device_id dsicm_of_match[] = { - { .compatible = "panel-dsi-cm", }, + { .compatible = "tpo,taal", .data = &taal_data }, + { .compatible = "nokia,himalaya", &himalaya_data }, + { .compatible = "motorola,droid4-panel", &droid4_data }, {}, };