The Northwest Logic MIPI DSI IP core can be found in NXPs i.MX8 SoCs.
Signed-off-by: Guido Günther agx@sigxcpu.org Tested-by: Robert Chiras robert.chiras@nxp.com Reviewed-by: Rob Herring robh@kernel.org --- .../bindings/display/bridge/nwl-dsi.yaml | 203 ++++++++++++++++++ 1 file changed, 203 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml new file mode 100644 index 000000000000..8cbecd53c1ac --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -0,0 +1,203 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Northwest Logic MIPI-DSI controller on i.MX SoCs + +maintainers: + - Guido Gúnther agx@sigxcpu.org + - Robert Chiras robert.chiras@nxp.com + +description: | + NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for + the SOCs NWL MIPI-DSI host controller. + +properties: + compatible: + const: fsl,imx8mq-nwl-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + items: + - description: DSI core clock + - description: RX_ESC clock (used in escape mode) + - description: TX_ESC clock (used in escape mode) + - description: PHY_REF clock + + clock-names: + items: + - const: core + - const: rx_esc + - const: tx_esc + - const: phy_ref + + mux-controls: + description: + mux controller node to use for operating the input mux + + phys: + maxItems: 1 + description: + A phandle to the phy module representing the DPHY + + phy-names: + items: + - const: dphy + + power-domains: + maxItems: 1 + + resets: + items: + - description: dsi byte reset line + - description: dsi dpi reset line + - description: dsi esc reset line + - description: dsi pclk reset line + + reset-names: + items: + - const: byte + - const: dpi + - const: esc + - const: pclk + + ports: + type: object + description: + A node containing DSI input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/graph.txt. + properties: + port@0: + type: object + description: + Input port node to receive pixel data from the + display controller. Exactly one endpoint must be + specified. + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + endpoint@0: + description: sub-node describing the input from LCDIF + type: object + + endpoint@1: + description: sub-node describing the input from DCSS + type: object + + reg: + const: 0 + + required: + - '#address-cells' + - '#size-cells' + - reg + additionalProperties: false + + port@1: + type: object + description: + DSI output port node to the panel or the next bridge + in the chain + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + required: + - '#address-cells' + - '#size-cells' + - port@0 + - port@1 + + additionalProperties: false + +patternProperties: + "^panel@[0-9]+$": + type: object + +required: + - '#address-cells' + - '#size-cells' + - clock-names + - clocks + - compatible + - interrupts + - mux-controls + - phy-names + - phys + - ports + - reg + - reset-names + - resets + +additionalProperties: false + +examples: + - | + + mipi_dsi: mipi_dsi@30a00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-nwl-dsi"; + reg = <0x30A00000 0x300>; + clocks = <&clk 163>, <&clk 244>, <&clk 245>, <&clk 164>; + clock-names = "core", "rx_esc", "tx_esc", "phy_ref"; + interrupts = <0 34 4>; + mux-controls = <&mux 0>; + power-domains = <&pgc_mipi>; + resets = <&src 0>, <&src 1>, <&src 2>, <&src 3>; + reset-names = "byte", "dpi", "esc", "pclk"; + phys = <&dphy>; + phy-names = "dphy"; + + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + port@0 { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0>; + mipi_dsi_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdif_mipi_dsi>; + }; + }; + port@1 { + reg = <1>; + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + };