26 Sep
2019
26 Sep
'19
12:54 p.m.
On 03/09/2019 17:23, Laurent Pinchart wrote:
Hi Tomi,
Thank you for the path.
On Mon, Sep 02, 2019 at 03:53:54PM +0300, Tomi Valkeinen wrote:
From: Alejandro Hernandez ajhernandez@ti.com
A "HDMI I2C Master Error" is sometimes reported with the current DDC SCL timings. The current settings for a 10us SCL period (100 KHz) causes the error with some displays. This patch increases the SCL signal period from 10us to 10.2us, with the new settings the error is not observed
It would be useful to document what those "some displays" are if you can.
Unfortunately I have no idea. This was quite a while ago.
Alejandro, do you recall?
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki