Fix interrupt enable/disable code for version 2 tilcdc. In version 2 tilcdc there is a separate register for disabling interrupts. Writing 0 to enable registers bits does not have any effect. The interrupt clear register works the same way, writing 1 to specific bit disables the interrupt and writing 0 does not have any effect.
The "bug" that is fixed here does not really do any harm since the interrupts are enabled only once in the power up and disabled before power down.
Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index c5d9e3a..964e192 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -376,13 +376,14 @@ static int tilcdc_irq_postinstall(struct drm_device *dev) struct tilcdc_drm_private *priv = dev->dev_private;
/* enable FIFO underflow irq: */ - if (priv->rev == 1) + if (priv->rev == 1) { tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_UNDERFLOW_INT_ENA); - else - tilcdc_set(dev, LCDC_INT_ENABLE_SET_REG, + } else { + tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_END_OF_FRAME0_INT_ENA | LCDC_FRAME_DONE); + }
return 0; } @@ -397,7 +398,7 @@ static void tilcdc_irq_uninstall(struct drm_device *dev) LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA); tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_V1_END_OF_FRAME_INT_ENA); } else { - tilcdc_clear(dev, LCDC_INT_ENABLE_SET_REG, + tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA | LCDC_V2_END_OF_FRAME0_INT_ENA | LCDC_FRAME_DONE); @@ -442,7 +443,7 @@ static const struct { REG(2, false, LCDC_INT_ENABLE_CLR_REG), REG(2, false, LCDC_END_OF_INT_IND_REG), REG(2, true, LCDC_CLK_ENABLE_REG), - REG(2, true, LCDC_INT_ENABLE_SET_REG), + REG(2, true, LCDC_INT_ENABLE_SET_REG), #undef REG };