On Gen3 hardware enabling a VSP plane doesn't change any register that requires DRES to take effect. Avoid a group restart in that case.
Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com --- drivers/gpu/drm/rcar-du/rcar_du_plane.c | 6 ++++++ drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 9 --------- 2 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c index 9b058d6cb032..22aeeb1cc1fb 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c @@ -560,6 +560,12 @@ void __rcar_du_plane_setup(struct rcar_du_group *rgrp, if (rcdu->vspd1_sink != vspd1_sink) { rcdu->vspd1_sink = vspd1_sink; rcar_du_set_dpad0_vsp1_routing(rcdu); + + /* + * Changes to the VSP1 sink take effect on DRES and thus + * need a restart of the group. + */ + rgrp->need_restart = true; } } } diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index b7fc5b069cbc..32530d698e75 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c @@ -84,15 +84,6 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
__rcar_du_plane_setup(crtc->group, &state);
- /* - * Ensure that the plane source configuration takes effect by requesting - * a restart of the group. See rcar_du_plane_atomic_update() for a more - * detailed explanation. - * - * TODO: Check whether this is still needed on Gen3. - */ - crtc->group->need_restart = true; - vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, &cfg); }