Am Montag, 4. August 2014, 12:55:59 schrieb mark yao:
Signed-off-by: mark yao yzq@rock-chips.com
.../devicetree/bindings/video/rockchip-panel.txt | 34 ++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/video/rockchip-panel.txt b/Documentation/devicetree/bindings/video/rockchip-panel.txt index f599806..f6d80f6 100644 --- a/Documentation/devicetree/bindings/video/rockchip-panel.txt +++ b/Documentation/devicetree/bindings/video/rockchip-panel.txt @@ -80,3 +80,37 @@ Example: rockchip,data-width = <24>; rockchip,panel = <&panel>; };
+Rockchip RK3288 EDP interface +================================ +Required properties: +-compatible: "rockchip,rk3288-edp";
+- reg: physical base address of the controller and length +- clocks: from common clock binding: handle to dp clock.
- of memory mapped region.
+- clock-names: from common clock binding:
- Required elements: "clk_edp"
"clk_edp_24m"
"clk_edp_24m_parent"
"pclk_edp"
+- rockchip,grf: this soc should set GRF regs, so need get grf here. +- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
- edp
+- rockchip,panel: required a panel node
+Example:
- edp: edp@ff970000 {
compatible = "rockchip,rk3288-edp";
reg = <0xff970000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru
PCLK_EDP_CTRL>, <&xin24m>; + clock-names = "clk_edp", "clk_edp_24m", "pclk_edp", "clk_edp_24m_parent"; +
clk_epd_24m_parent is not part of the hardware, so instead of referencing the target-parent as part of the device clocks, the new "clk: Support for clock parents and rates assigned from device tree" should be used for setting the target parent - so the re-parenting code should also move out of the driver.
This commit [0] is part of the clk-pull request and thus will most likely be part of 3.17.
Heiko
[0] http://git.linaro.org/people/mike.turquette/linux.git/commitdiff/86be408bfbd...
rockchip,grf = <&grf>;
resets = <&cru 111>;
reset-names = "edp";
rockchip,panel = <&panel>;
- };