On Fri, Feb 12, 2021 at 10:53:35AM +0100, Daniel Mack wrote:
This adds documentation for a new ILI9163 based, SPI connected display.
Signed-off-by: Daniel Mack daniel@zonque.org
.../bindings/display/ilitek,ili9163.txt | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9163.txt
Bindings are in schema format now.
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9163.txt b/Documentation/devicetree/bindings/display/ilitek,ili9163.txt new file mode 100644 index 0000000000000..fee119991c14e --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9163.txt @@ -0,0 +1,27 @@ +Ilitek ILI9163 display panels
+This binding is for display panels using an Ilitek ILI9163 controller in SPI +mode.
+Required properties: +- compatible: "newhaven,1.8-128160EF", "ilitek,ili9163" +- dc-gpios: D/C pin +- reset-gpios: Reset pin
+The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified.
+Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel
+Example:
- display@0{
compatible = "newhaven,1.8-128160EF", "ilitek,ili9163"reg = <0>;spi-max-frequency = <32000000>;dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;rotation = <270>;backlight = <&backlight>;- };
-- 2.29.2