Hi Benjamin, and many thanks for this serie. Regarding this patch:
Reviewed-by: Philippe Cornu philippe.cornu@st.com Philippe :-)
On 2/6/20 2:33 PM, Benjamin Gaignard wrote:
From: Sam Ravnborg sam@ravnborg.org
To complement panel-simple.yaml, create panel-simple-dsi.yaml. panel-simple-dsi-yaml are for all simple DSP panels with a single power-supply and optional backlight / enable GPIO.
Migrate panasonic,vvx10f034n00 over to the new file.
The objectives with one file for all the simple DSI panels are: - Make it simpler to add bindings for simple DSI panels - Keep the number of bindings file lower - Keep the binding documentation for simple DSI panels more consistent
Signed-off-by: Sam Ravnborg sam@ravnborg.org Signed-off-by: Benjamin Gaignard benjamin.gaignard@st.com Cc: Thierry Reding thierry.reding@gmail.com Cc: Rob Herring robh@kernel.org Cc: Maxime Ripard mripard@kernel.org Cc: Yannick Fertre yannick.fertre@st.com Cc: Mark Rutland mark.rutland@arm.com Cc: Daniel Vetter daniel@ffwll.ch Cc: dri-devel@lists.freedesktop.org Cc: devicetree@vger.kernel.org
version 4:
- remove orisetech,otm8009a and raydium,rm68200 compatibles
- remove reset-gpios optional property
version 3:
add orisetech,otm8009a and raydium,rm68200 compatibles
add reset-gpios optional property
fix indentation on compatible enumeration
.../display/panel/panasonic,vvx10f034n00.txt | 20 ------- .../bindings/display/panel/panel-simple-dsi.yaml | 67 ++++++++++++++++++++++ 2 files changed, 67 insertions(+), 20 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt create mode 100644 Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt deleted file mode 100644 index 37dedf6a6702..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt +++ /dev/null @@ -1,20 +0,0 @@ -Panasonic 10" WUXGA TFT LCD panel
-Required properties: -- compatible: should be "panasonic,vvx10f034n00" -- reg: DSI virtual channel of the peripheral -- power-supply: phandle of the regulator that provides the supply voltage
-Optional properties: -- backlight: phandle of the backlight device attached to the panel
-Example:
- mdss_dsi@fd922800 {
panel@0 {
compatible = "panasonic,vvx10f034n00";
reg = <0>;
power-supply = <&vreg_vsp>;
backlight = <&lp8566_wled>;
};
- };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml new file mode 100644 index 000000000000..8b60368a2425 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Simple DSI panels with a single power-supply
+maintainers:
- Thierry Reding thierry.reding@gmail.com
- Sam Ravnborg sam@ravnborg.org
+description: |
- This binding file is a collection of the DSI panels that
- requires only a single power-supply.
- There are optionally a backlight and an enable GPIO.
- The panel may use an OF graph binding for the association to the display,
- or it may be a direct child node of the display.
- If the panel is more advanced a dedicated binding file is required.
+allOf:
- $ref: panel-common.yaml#
+properties:
- compatible:
- enum:
# compatible must be listed in alphabetical order, ordered by compatible.
# The description in the comment is mandatory for each compatible.
# Panasonic 10" WUXGA TFT LCD panel
- panasonic,vvx10f034n00
- reg:
- maxItems: 1
- description: DSI virtual channel
- backlight: true
- enable-gpios: true
- port: true
- power-supply: true
+additionalProperties: false
+required:
- compatible
- power-supply
- reg
+examples:
- |
- mdss_dsi@fd922800 {
#address-cells = <1>;
#size-cells = <0>;
panel@0 {
compatible = "panasonic,vvx10f034n00";
reg = <0>;
power-supply = <&vcc_lcd_reg>;
port {
panel: endpoint {
remote-endpoint = <<dc_out>;
};
};
};
- };