On Tue, Apr 03, 2018 at 12:15:25PM +0200, Lukasz Majewski wrote:
This commit adds support for AUO's 7.0" display.
Signed-off-by: Lukasz Majewski lukma@denx.de
.../bindings/display/panel/auo,g070vvn01 | 30 +++++++++++++++++++++
.txt
drivers/gpu/drm/panel/panel-simple.c | 31 ++++++++++++++++++++++ 2 files changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g070vvn01
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01 b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01 new file mode 100644 index 000000000000..bd4017362094 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01 @@ -0,0 +1,30 @@ +AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
+Required properties: +- compatible: should be "auo,g070vvn01" +- backlight: phandle of the backlight device attached to the panel +- power-supply: single regulator to provide the supply voltage
+Required nodes: +- port: Parallel port mapping to connect this display
+This panel needs single power supply voltage. Its backlight is conntrolled +via PWM signal.
+Example: +--------
+Example device-tree definition when connected to iMX6Q based board
- lcd_panel: lcd-panel {
compatible = "auo,g070vvn01";backlight = <&backlight_lcd>;bus-format-override = "rgb565";
This is not documented though it appears in a few i.MX dts files.
power-supply = <®_display>;port {lcd_panel_in: endpoint {remote-endpoint = <&lcd_display_out>;};};- };