From: ChiYuan Huang cy_huang@richtek.com
Adds DT binding document for Richtek RT4831 DSV regulator.
Signed-off-by: ChiYuan Huang cy_huang@richtek.com --- since v5 - Revert it back from v3 patch. - Drop the example in dt-binding, Already full example in mfd dt-binding. --- .../regulator/richtek,rt4831-regulator.yaml | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml new file mode 100644 index 00000000..d9c2333 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt4831-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 Display Bias Voltage Regulator + +maintainers: + - ChiYuan Huang cy_huang@richtek.com + +description: | + RT4831 is a multifunctional device that can provide power to the LCD display + and LCD backlight. + + For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V. + It is sufficient to meet the current LCD power requirement. + + DSVLCM is a boost regulator in IC internal as DSVP and DSVN input power. + Its voltage should be configured above 0.15V to 0.2V gap larger than the + voltage needed for DSVP and DSVN. Too much voltage gap could improve the + voltage drop from the heavy loading scenario. But it also make the power + efficiency worse. It's a trade-off. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +patternProperties: + "^DSV(LCM|P|N)$": + type: object + $ref: regulator.yaml# + description: + Properties for single Display Bias Voltage regulator. + +additionalProperties: false