Update the mediatek,dpi binding to use the graph schema.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- .../display/mediatek/mediatek,cec.yaml | 51 +++++++ .../display/mediatek/mediatek,hdmi-ddc.yaml | 57 ++++++++ .../display/mediatek/mediatek,hdmi.txt | 136 ------------------ .../display/mediatek/mediatek,hdmi.yaml | 131 +++++++++++++++++ 4 files changed, 239 insertions(+), 136 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml delete mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml new file mode 100644 index 000000000000..408e7dfce409 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI CEC Controller Device Tree Bindings + +maintainers: + - CK Hu ck.hu@mediatek.com + - Jitao shi jitao.shi@mediatek.com + +description: | + The HDMI CEC controller handles hotplug detection and CEC communication. + +properties: + compatible: + enum: + - mediatek,mt7623-hdmi + - mediatek,mt8173-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + cec: cec@10013000 { + compatible = "mediatek,mt8173-cec"; + reg = <0x10013000 0xbc>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_CEC>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml new file mode 100644 index 000000000000..c15b3470d652 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI DDC Device Tree Bindings + +maintainers: + - CK Hu ck.hu@mediatek.com + - Jitao shi jitao.shi@mediatek.com + +description: | + The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. + +properties: + compatible: + enum: + - mediatek,mt7623-hdmi + - mediatek,mt8173-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ddc-i2c + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmi_ddc0: i2c@11012000 { + compatible = "mediatek,mt8173-hdmi-ddc"; + reg = <0x11012000 0x1c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_I2C5>; + clock-names = "ddc-i2c"; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt deleted file mode 100644 index b284ca51b913..000000000000 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt +++ /dev/null @@ -1,136 +0,0 @@ -Mediatek HDMI Encoder -===================== - -The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from -its parallel input. - -Required properties: -- compatible: Should be "mediatek,<chip>-hdmi". -- the supported chips are mt2701, mt7623 and mt8173 -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "pixel", "pll", "bclk", and "spdif". -- phys: phandle link to the HDMI PHY node. - See Documentation/devicetree/bindings/phy/phy-bindings.txt for details. -- phy-names: must contain "hdmi" -- mediatek,syscon-hdmi: phandle link and register offset to the system - configuration registers. For mt8173 this must be offset 0x900 into the - MMSYS_CONFIG region: <&mmsys 0x900>. -- ports: A node containing input and output port nodes with endpoint - definitions as documented in Documentation/devicetree/bindings/graph.txt. -- port@0: The input port in the ports node should be connected to a DPI output - port. -- port@1: The output port in the ports node should be connected to the input - port of a connector node that contains a ddc-i2c-bus property, or to the - input port of an attached bridge chip, such as a SlimPort transmitter. - -HDMI CEC -======== - -The HDMI CEC controller handles hotplug detection and CEC communication. - -Required properties: -- compatible: Should be "mediatek,<chip>-cec" -- the supported chips are mt7623 and mt8173 -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clock - -HDMI DDC -======== - -The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. -The Mediatek's I2C controller is used to interface with I2C devices. - -Required properties: -- compatible: Should be "mediatek,<chip>-hdmi-ddc" -- the supported chips are mt7623 and mt8173 -- reg: Physical base address and length of the controller's registers -- clocks: device clock -- clock-names: Should be "ddc-i2c". - -HDMI PHY -======== -See phy/mediatek,hdmi-phy.yaml - -Example: - -cec: cec@10013000 { - compatible = "mediatek,mt8173-cec"; - reg = <0 0x10013000 0 0xbc>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_CEC>; -}; - -hdmi_phy: hdmi-phy@10209100 { - compatible = "mediatek,mt8173-hdmi-phy"; - reg = <0 0x10209100 0 0x24>; - clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>; - clock-names = "pll_ref"; - clock-output-names = "hdmitx_dig_cts"; - mediatek,ibias = <0xa>; - mediatek,ibias_up = <0x1c>; - #clock-cells = <0>; - #phy-cells = <0>; -}; - -hdmi_ddc0: i2c@11012000 { - compatible = "mediatek,mt8173-hdmi-ddc"; - reg = <0 0x11012000 0 0x1c>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_I2C5>; - clock-names = "ddc-i2c"; -}; - -hdmi0: hdmi@14025000 { - compatible = "mediatek,mt8173-hdmi"; - reg = <0 0x14025000 0 0x400>; - interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; - clocks = <&mmsys CLK_MM_HDMI_PIXEL>, - <&mmsys CLK_MM_HDMI_PLLCK>, - <&mmsys CLK_MM_HDMI_AUDIO>, - <&mmsys CLK_MM_HDMI_SPDIF>; - clock-names = "pixel", "pll", "bclk", "spdif"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pin>; - phys = <&hdmi_phy>; - phy-names = "hdmi"; - mediatek,syscon-hdmi = <&mmsys 0x900>; - assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>; - assigned-clock-parents = <&hdmi_phy>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - hdmi0_in: endpoint { - remote-endpoint = <&dpi0_out>; - }; - }; - - port@1 { - reg = <1>; - - hdmi0_out: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - }; -}; - -connector { - compatible = "hdmi-connector"; - type = "a"; - ddc-i2c-bus = <&hdmiddc0>; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi0_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml new file mode 100644 index 000000000000..9c125d7c8934 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI Encoder Device Tree Bindings + +maintainers: + - CK Hu ck.hu@mediatek.com + - Jitao shi jitao.shi@mediatek.com + +description: | + The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from + its parallel input. + +properties: + compatible: + enum: + - mediatek,mt2701-hdmi + - mediatek,mt7623-hdmi + - mediatek,mt8173-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Pixel Clock + - description: HDMI PLL + - description: Bit Clock + - description: S/PDIF Clock + + clock-names: + items: + - const: pixel + - const: pll + - const: bclk + - const: spdif + + phys: + maxItems: 1 + + phy-names: + items: + - const: hdmi + + mediatek,syscon-hdmi: + $ref: '/schemas/types.yaml#/definitions/phandle' + minItems: 2 + description: | + phandle link and register offset to the system configuration registers. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + Input port node. This port should be connected to a DPI output port. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + Output port node. This port should be connected to the input port of a connector + node that contains a ddc-i2c-bus property, or to the input port of an attached + bridge chip, such as a SlimPort transmitter. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - mediatek,syscon-hdmi + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmi0: hdmi@14025000 { + reg = <0x14025000 0x400>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_HDMI_PIXEL>, + <&mmsys CLK_MM_HDMI_PLLCK>, + <&mmsys CLK_MM_HDMI_AUDIO>, + <&mmsys CLK_MM_HDMI_SPDIF>; + clock-names = "pixel", "pll", "bclk", "spdif"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pin>; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + mediatek,syscon-hdmi = <&mmsys 0x900>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + +...