Add MIPI DSI pipeline for Allwinner A64.
- dsi node, with A64 compatible since it doesn't support DSI_SCLK gating unlike A33 - dphy node, with A64 compatible with A33 fallback since DPHY on A64 and A33 is similar - finally, attach the dsi_in to tcon0 for complete MIPI DSI
Signed-off-by: Jagan Teki jagan@amarulasolutions.com Tested-by: Merlijn Wajer merlijn@wizzup.org --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 69128a6dfc46..a52dfa98ac5e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -382,6 +382,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; }; }; }; @@ -1003,6 +1009,37 @@ status = "disabled"; };
+ dsi: dsi@1ca0000 { + compatible = "allwinner,sun50i-a64-mipi-dsi"; + reg = <0x01ca0000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MIPI_DSI>; + resets = <&ccu RST_BUS_MIPI_DSI>; + phys = <&dphy>; + phy-names = "dphy"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + port { + dsi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi>; + }; + }; + }; + + dphy: d-phy@1ca1000 { + compatible = "allwinner,sun50i-a64-mipi-dphy", + "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01ca1000 0x1000>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + status = "disabled"; + #phy-cells = <0>; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi";