These were missing '\n' terminations, add them.
Signed-off-by: Joe Perches joe@perches.com --- drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c index 158a6d548068..d88ea8da2ec2 100644 --- a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c +++ b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c @@ -123,7 +123,7 @@ static int jh057n_init_sequence(struct jh057n *ctx)
ret = mipi_dsi_dcs_exit_sleep_mode(dsi); if (ret < 0) { - DRM_DEV_ERROR(dev, "Failed to exit sleep mode"); + DRM_DEV_ERROR(dev, "Failed to exit sleep mode\n"); return ret; } /* Panel is operational 120 msec after reset */ @@ -132,7 +132,7 @@ static int jh057n_init_sequence(struct jh057n *ctx) if (ret) return ret;
- DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done"); + DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n"); return 0; }
@@ -172,7 +172,7 @@ static int jh057n_prepare(struct drm_panel *panel) if (ctx->prepared) return 0;
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel."); + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n"); gpiod_set_value_cansleep(ctx->reset_gpio, 1); usleep_range(20, 40); gpiod_set_value_cansleep(ctx->reset_gpio, 0); @@ -180,7 +180,8 @@ static int jh057n_prepare(struct drm_panel *panel)
ret = jh057n_init_sequence(ctx); if (ret < 0) { - DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d", ret); + DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n", + ret); return ret; }
@@ -212,7 +213,7 @@ static int jh057n_get_modes(struct drm_panel *panel)
mode = drm_mode_duplicate(panel->drm, &default_mode); if (!mode) { - DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u", + DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n", default_mode.hdisplay, default_mode.vdisplay, default_mode.vrefresh); return -ENOMEM; @@ -241,7 +242,7 @@ static int allpixelson_set(void *data, u64 val) struct jh057n *ctx = data; struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on"); + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n"); dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON); msleep(val * 1000); /* Reset the panel to get video back */ @@ -290,7 +291,7 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(ctx->reset_gpio)) { - DRM_DEV_ERROR(dev, "cannot get reset gpio"); + DRM_DEV_ERROR(dev, "cannot get reset gpio\n"); return PTR_ERR(ctx->reset_gpio); }
@@ -315,12 +316,12 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi); if (ret < 0) { - DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?"); + DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?\n"); drm_panel_remove(&ctx->panel); return ret; }
- DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready", + DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n", default_mode.hdisplay, default_mode.vdisplay, default_mode.vrefresh, mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);