Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed.
Fixes error: panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517
Signed-off-by: David Heidelberg david@ixit.cz --- v2: - original v1 patch name "drm/panel: JDI LT070ME05000 remove useless warning" - use dev_err_probe function --- .../gpu/drm/panel/panel-jdi-lt070me05000.c | 36 ++++++++----------- 1 file changed, 14 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c index ea0e7221e706..7069201e6cac 100644 --- a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c +++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c @@ -400,38 +400,30 @@ static int jdi_panel_add(struct jdi_panel *jdi)
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(jdi->supplies), jdi->supplies); - if (ret < 0) { - dev_err(dev, "failed to init regulator, ret=%d\n", ret); - return ret; - } + if (ret < 0) + return dev_err_probe(dev, ret, + "failed to init regulator, ret=%d\n", ret);
jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); if (IS_ERR(jdi->enable_gpio)) { - ret = PTR_ERR(jdi->enable_gpio); - dev_err(dev, "cannot get enable-gpio %d\n", ret); - return ret; + return dev_err_probe(dev, PTR_ERR(jdi->enable_gpio), + "cannot get enable-gpio %d\n", ret); }
jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(jdi->reset_gpio)) { - ret = PTR_ERR(jdi->reset_gpio); - dev_err(dev, "cannot get reset-gpios %d\n", ret); - return ret; - } + if (IS_ERR(jdi->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(jdi->reset_gpio), + "cannot get reset-gpios %d\n", ret);
jdi->dcdc_en_gpio = devm_gpiod_get(dev, "dcdc-en", GPIOD_OUT_LOW); - if (IS_ERR(jdi->dcdc_en_gpio)) { - ret = PTR_ERR(jdi->dcdc_en_gpio); - dev_err(dev, "cannot get dcdc-en-gpio %d\n", ret); - return ret; - } + if (IS_ERR(jdi->dcdc_en_gpio)) + return dev_err_probe(dev, PTR_ERR(jdi->dcdc_en_gpio), + "cannot get dcdc-en-gpio %d\n", ret);
jdi->backlight = drm_panel_create_dsi_backlight(jdi->dsi); - if (IS_ERR(jdi->backlight)) { - ret = PTR_ERR(jdi->backlight); - dev_err(dev, "failed to register backlight %d\n", ret); - return ret; - } + if (IS_ERR(jdi->backlight)) + return dev_err_probe(dev, PTR_ERR(jdi->backlight), + "failed to register backlight %d\n", ret);
drm_panel_init(&jdi->base, &jdi->dsi->dev, &jdi_panel_funcs, DRM_MODE_CONNECTOR_DSI);