(Now with Heiko's address fixed)
On Sat, 13 Feb 2021 at 10:53, Ezequiel Garcia ezequiel@vanguardiasur.com.ar wrote:
Hi Chris,
I'm hijacking this discussion a bit.
I recently tried to boot maline on my Odroid GOA, which I managed to do, except the display wasn't displaying anything :-)
Everything looks good on a quick look, the Inno PHY driver is here, and there's a DRM card registered with the right mode 320x240 and connected status (which I suppose doesn't mean much in this case). Also, the backlight is on.
Looks like this is working for you, so I was wondering if maybe this would ring a bell, or perhaps you're aware of any patches we are missing in v5.11-rc7 (which is what I'm basing on). Or maybe I'm missing some config?...
Any ideas would be welcome!
Ezequiel
On Fri, 12 Feb 2021 at 12:51, Chris Morgan macromorgan@hotmail.com wrote:
Update the panel to allow setting the rotation value in device tree.
Signed-off-by: Chris Morgan macromorgan@hotmail.com
drivers/gpu/drm/panel/panel-elida-kd35t133.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c index bc36aa3c1123..d8534406d1ef 100644 --- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c +++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c @@ -42,6 +42,7 @@ struct kd35t133 { struct gpio_desc *reset_gpio; struct regulator *vdd; struct regulator *iovcc;
enum drm_panel_orientation orientation; bool prepared;};
@@ -216,6 +217,7 @@ static int kd35t133_get_modes(struct drm_panel *panel, connector->display_info.width_mm = mode->width_mm; connector->display_info.height_mm = mode->height_mm; drm_mode_probed_add(connector, mode);
drm_connector_set_panel_orientation(connector, ctx->orientation); return 1;} @@ -258,6 +260,12 @@ static int kd35t133_probe(struct mipi_dsi_device *dsi) return ret; }
ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);if (ret < 0) {dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);return ret;}mipi_dsi_set_drvdata(dsi, ctx); ctx->dev = dev;-- 2.25.1
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel