Currently, if one of the factors isn't present, bit 0 gets always set to 1. For example, A83T has NMP PLLs modelled as NKMP PLL without K. Since K is not specified, it's offset, width and shift is 0. Driver assumes that lowest value possible is 1, otherwise we would get division by 0. That situation causes that bit 0 is always set, which may change wanted clock rate.
Fix that by masking every factor according to it's specified width. Factors with width set to 0 won't have any influence to final register value.
Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net --- drivers/clk/sunxi-ng/ccu_nkmp.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c index e58c95787f94..a99068a08315 100644 --- a/drivers/clk/sunxi-ng/ccu_nkmp.c +++ b/drivers/clk/sunxi-ng/ccu_nkmp.c @@ -134,6 +134,7 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw); + u32 n_mask, k_mask, m_mask, p_mask; struct _ccu_nkmp _nkmp; unsigned long flags; u32 reg; @@ -149,18 +150,20 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
ccu_nkmp_find_best(parent_rate, rate, &_nkmp);
+ n_mask = GENMASK(nkmp->n.width + nkmp->n.shift - 1, nkmp->n.shift); + k_mask = GENMASK(nkmp->k.width + nkmp->k.shift - 1, nkmp->k.shift); + m_mask = GENMASK(nkmp->m.width + nkmp->m.shift - 1, nkmp->m.shift); + p_mask = GENMASK(nkmp->p.width + nkmp->p.shift - 1, nkmp->p.shift); + spin_lock_irqsave(nkmp->common.lock, flags);
reg = readl(nkmp->common.base + nkmp->common.reg); - reg &= ~GENMASK(nkmp->n.width + nkmp->n.shift - 1, nkmp->n.shift); - reg &= ~GENMASK(nkmp->k.width + nkmp->k.shift - 1, nkmp->k.shift); - reg &= ~GENMASK(nkmp->m.width + nkmp->m.shift - 1, nkmp->m.shift); - reg &= ~GENMASK(nkmp->p.width + nkmp->p.shift - 1, nkmp->p.shift); - - reg |= (_nkmp.n - nkmp->n.offset) << nkmp->n.shift; - reg |= (_nkmp.k - nkmp->k.offset) << nkmp->k.shift; - reg |= (_nkmp.m - nkmp->m.offset) << nkmp->m.shift; - reg |= ilog2(_nkmp.p) << nkmp->p.shift; + reg &= ~(n_mask | k_mask | m_mask | p_mask); + + reg |= ((_nkmp.n - nkmp->n.offset) << nkmp->n.shift) & n_mask; + reg |= ((_nkmp.k - nkmp->k.offset) << nkmp->k.shift) & k_mask; + reg |= ((_nkmp.m - nkmp->m.offset) << nkmp->m.shift) & m_mask; + reg |= (ilog2(_nkmp.p) << nkmp->p.shift) & p_mask;
writel(reg, nkmp->common.base + nkmp->common.reg);